We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 1.1V ECC RDIMM THINKMATE SuperServer 741P-TR/TRT memory upgrade

SKU CH-4FSE-RY5ZB

Adds 128 GB of DDR5 ECC registered server memory in eight 16 GB modules at 4800 MT/s CL40 for ThinkMate SuperServer 741P-TR and 741P-TRT

  • Capacity128GB (8 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw in dense configurations
  • Validated for Thinkmate SuperServer 741P-TR and 741P-TRT systems

128GB DDR5 ECC RDIMM kit

This 128GB kit contains eight 16GB DDR5 4800 ECC RDIMM modules built for the THINKMATE SuperServer 741P-TR and 741P-TRT. Registered buffering and error correction protect data integrity in continuous server workloads. The 1.1V operating voltage matches the DDR5 baseline for these platforms.

Upgrade from lower-capacity or non-ECC memory

Replacing smaller RDIMM sets or unbuffered modules adds capacity and the error detection that mission-critical tasks require. The jump is worth it when workloads exceed current memory limits or when silent data corruption becomes unacceptable. Systems already running DDR5 4800 RDIMMs gain capacity without changing speed or voltage.

Eight-slot population for full capacity

The 8x16GB configuration fills eight 288-pin DDR5 RDIMM slots to reach 128GB. Each module is single-rank 1Rx8 using major OEM chips from Samsung, Micron or Hynix. No heat spreaders are fitted, so airflow must be managed by the server chassis. The kit frees no slots; it occupies all populated channels for maximum density.

Highlights

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw in dense configurations
  • Validated for Thinkmate SuperServer 741P-TR and 741P-TRT systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR5 RDIMM modules fit the SuperServer 741P-TR and 741P-TRT tower memory slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules designed for the THINKMATE SuperServer 741P-TR and 741P-TRT tower systems.

What is the correct order to install the eight 1Rx8 modules so the registered ECC channels populate properly?

Follow the motherboard manual to fill each channel sequentially; a common mistake is skipping a slot and leaving a channel unbalanced.

When should the 1.1 V DDR5 4800 CL40 registered DIMMs be reseated or replaced to maintain ECC integrity?

Reseat the modules if the system logs correctable ECC errors after firmware updates; replace them only if uncorrectable errors persist.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.