We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 ECC RDIMM THINKMATE memory upgrade

SKU CH-YTDT-G4WG6

128 GB DDR5 4800 ECC registered kit with eight 16 GB modules for Thinkmate servers

  • Capacity128GB (8 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB kit expands server capacity for heavy workloads
  • DDR5 4800 speed with CL40 latency supports fast data throughput
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw per module
  • 8 x 16GB 288-pin RDIMM configuration fits Thinkmate HDX-QN8-52E4

System-specific DDR5 ECC RDIMM kit

This NEMIX RAM kit delivers 128GB across eight 16GB registered DDR5 modules built for THINKMATE HDX-QN8-52E4 high-density servers. ECC and registered buffering protect data integrity in mission-critical workloads. Modules run at 4800MT/s with CL40 latency at 1.1V using major OEM DRAM chips.

DDR5 4800 registered ECC constraints

DDR5 4800 defines the maximum JEDEC speed and voltage for these modules; they will not operate above 4800MT/s without platform overclocking support which server boards typically disable. Registered signalling adds one cycle of command delay versus unbuffered DIMMs. ECC requires a motherboard with ECC-enabled memory controller and BIOS support.

Pre-installation compatibility checks

Verify the THINKMATE HDX-QN8-52E4 motherboard accepts 288-pin DDR5 RDIMMs and supports 1Rx8 organisation across all eight slots. Confirm BIOS revision enables ECC and registered operation at 1.1V. Ensure the server chassis provides enough DIMM slots for the full 8-module kit and that cooling airflow reaches the bare modules.

Highlights

  • 128GB kit expands server capacity for heavy workloads
  • DDR5 4800 speed with CL40 latency supports fast data throughput
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw per module
  • 8 x 16GB 288-pin RDIMM configuration fits Thinkmate HDX-QN8-52E4

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I choose the 128GB kit of eight 16GB modules or a different capacity for my THINKMATE HDX-QN8-52E4?

The 128GB kit provides eight 16GB RDIMMs that fill all slots on supported THINKMATE servers for maximum registered ECC capacity.

What does the DDR5 4800 speed mean once the modules are installed in a THINKMATE server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering PC5-38400 bandwidth for registered ECC workloads.

How does the 288-pin DDR5 RDIMM interface affect compatibility and performance limits?

The 288-pin registered DDR5 form factor fits only DDR5 RDIMM slots and caps operation at the 4800 MT/s JEDEC standard with ECC active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.