We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB DDR4 3200 CL22 4Rx4 ECC RDIMM memory upgrade

SKU CH-T6K7-GHGB4

A 128 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for ThinkMate GPU-optimised servers

  • Capacity128GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128 GB capacity expands server memory headroom for virtualization
  • DDR4 3200 speed delivers high throughput for GPU-optimized workloads
  • ECC registered design protects data integrity under sustained load
  • 2 V operation reduces power draw per module
  • Validated for ThinkMate GPX-PS4 servers ensures drop-in compatibility

Server Memory Upgrade

This NEMIX RAM module adds 128GB of DDR4 ECC registered memory to compatible Thinkmate GPU-optimized servers. It operates at 3200MHz with a CL22 latency and 1.2V voltage. The single 288-pin RDIMM uses a 4Rx4 organisation built from major OEM DRAM chips. It targets IT professionals expanding capacity in mission-critical environments.

Registered ECC Reliability

Registered buffering reduces electrical load on the server memory controller, allowing stable operation with high-density modules. ECC circuitry detects and corrects single-bit errors to protect data integrity under sustained workloads. The module ships without a heat spreader, relying on chassis airflow for cooling. Installation follows standard RDIMM procedures documented in the system manual.

Capacity Expansion Path

This 128GB stick replaces lower-capacity RDIMMs to increase total system memory without occupying additional slots. The jump is worthwhile when virtualisation, GPU compute or large datasets exceed current RAM limits. Buyers needing non-ECC memory, desktop DIMM form factors or speeds beyond DDR4 3200 should look elsewhere.

Highlights

  • 128 GB capacity expands server memory headroom for virtualization
  • DDR4 3200 speed delivers high throughput for GPU-optimized workloads
  • ECC registered design protects data integrity under sustained load
  • 2 V operation reduces power draw per module
  • Validated for ThinkMate GPX-PS4 servers ensures drop-in compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-744K1
Capacity128GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (1X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the DDR4 3200 PC4-25600 interface limit actual throughput on the ThinkMate server board?

The module runs at DDR4 3200 with a PC4-25600 rating, so peak bandwidth is capped at 25 600 MB/s on any compatible ThinkMate platform.

What physical slot and clearance does the 288-pin 4Rx4 RDIMM require?

It fits a standard 288-pin DDR4 RDIMM socket; the 4Rx4 layout uses the same height as other registered modules, so no extra clearance is needed.

What is the correct installation sequence for a single 128 GB registered ECC module?

Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until both latches click, then verify 1.20 V operation in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.