NEMIX RAM 64GB (8x8GB) DDR4 3200 PC4-25600 CL22 1Rx8 1.2V 288-pin ECC Registered RDIMM memory upgrade
- 64GB (8 x 8GB)
- 288-Pin DDR4 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128GB DDR4 3200MHz registered ECC RDIMM built for the Supermicro X12SPA-TF motherboard
Size 128GB
This NEMIX RAM kit delivers 128GB of DDR4 3200MHz PC4-25600 memory in a single 288-pin RDIMM. It operates at 1.2V with CL22 latency and uses a 2Rx4 registered ECC configuration designed for the Supermicro X12SPA-TF motherboard. The module arrives new and ready for installation.
This memory suits administrators upgrading or repairing the specific Supermicro X12SPA-TF platform where the board's population rules call for a registered 2Rx4 DIMM at this speed and voltage. Builders working with consumer desktop boards, laptops, or servers that require unbuffered UDIMMs or SODIMMs cannot use this module. Systems limited to lower maximum capacities or different rank structures should look elsewhere.
The 128GB density provides substantial headroom for virtualisation hosts, in-memory databases, and heavy multi-tenant workloads that benefit from maximum DIMM-slot utilisation. Registered buffering allows full-speed operation across all populated slots without loading down the memory controller. Workloads exceeding this single-module capacity or requiring higher frequencies than 3200MHz will need a different solution.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR4 ECC RDIMM Registered Server Memory |
| Part Number | MR25600-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR4 3200MHz PC4-25600 2Rx4 1.2V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the X12SPA-TF requires 288-pin DDR4 RDIMM modules; this kit matches that exact form factor and will not fit UDIMM or SODIMM slots.
Mixing ranks is possible but the board's population rules dictate slot order; consult the motherboard manual for the approved sequence to avoid reduced speed or capacity.
Enter the BIOS/UEFI on first boot and verify total memory shows 128GB, speed reads 3200MHz (PC4-25600), and ECC status is reported as enabled or active.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?