We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC Registered RDIMM 1Rx8 CL22 memory upgrade

SKU CH-9Z5T-MG2ZS

8 GB DDR4-3200 ECC registered RDIMM (CL22, 1.2 V, 1Rx8, 288-pin) validated for Supermicro X12SPT-G and X12SPT-GC motherboards

  • Capacity8GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 8GB

Show 8 more configurations
  • Precise spec match ensures full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 rank layout fits Supermicro X12SPT-G boards
  • 2V operation meets server power envelopes
  • CL22 latency delivers rated DDR4-3200 throughput

Exact-Match Upgrade

This NEMIX RAM module is an 8GB DDR4 3200 registered ECC RDIMM built for Supermicro X12SPT-G and X12SPT-GC motherboards. It delivers the precise 1Rx8 rank, 1.2V voltage and CL22 timing the memory controller expects so the server recognises full capacity at rated speed. The 288-pin registered form factor matches the board's physical and electrical requirements exactly.

Sustained Load Behaviour

Registered architecture buffers the command and address signals to reduce electrical load on the memory controller when every slot is populated. This allows the system to maintain stable operation at full capacity during extended workloads without the signal degradation that can occur with unbuffered modules. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots before they reach production.

Build Quality and Connectors

The module uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader, keeping the profile low for dense server chassis. A 288-pin gold-edge connector seats firmly in the board's RDIMM slots, and the registered design ensures reliable contact even in fully populated configurations. Buyers needing higher densities or different form factors such as UDIMM or SODIMM will find this module incompatible.

Highlights

  • Precise spec match ensures full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 rank layout fits Supermicro X12SPT-G boards
  • 2V operation meets server power envelopes
  • CL22 latency delivers rated DDR4-3200 throughput

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.2 V DDR4 3200 RDIMM draw when the server runs continuously?

Each module operates at 1.2 V, the standard DDR4 voltage, so power draw stays low even with all slots populated around the clock.

Does my Supermicro X12SPT-G board need a specific BIOS version or CPU to recognise this 1Rx8 registered ECC DIMM?

The DIMM is validated for the X12SPT-G and X12SPT-GC motherboards; consult the board manual for any BIOS or CPU requirements before installing.

Can I mix this CL22 registered ECC stick with older unbuffered non-ECC DDR4 modules I already own?

No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC UDIMMs; the memory controller requires identical registered ECC modules in every populated slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.