We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 1.1V 4Rx4 RDIMM memory upgrade

SKU CH-DYPZ-WRD3D

A 128 GB DDR5 4800 RDIMM module with ECC and registered buffering for Supermicro CloudDC SuperServer systems

  • Capacity128GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB DDR5 capacity scales server workloads
  • 4800MHz speed with CL40 latency processes data efficiently
  • 1V operation reduces power draw per module
  • ECC registered design protects data integrity under load
  • Validated for SuperMicro CloudDC SYS-621C-TN12R SYS-611C-TN4R SYS-121C-TN2R

128 GB DDR5 RDIMM for Supermicro servers

This NEMIX RAM module delivers 128 GB of DDR5 4800 memory in a single 288-pin registered DIMM. It operates at 1.1 V with CL40 latency and includes ECC and 4Rx4 organisation for data-integrity workloads. The part is validated for Supermicro CloudDC SuperServer platforms including the SYS-621C-TN12R, SYS-611C-TN4R and SYS-121C-TN2R.

Upgrade path from lower-capacity DDR5 RDIMMs

Replacing smaller registered modules with this 128 GB stick increases total memory without consuming additional slots. The jump is worthwhile when applications demand larger in-memory datasets or higher virtual-machine density and the platform supports 4Rx4 registered DIMMs at 4800 MT/s.

Suited for IT teams expanding Supermicro CloudDC

Administrators scaling memory in the listed SuperServer models can add this module directly. Builders needing unbuffered UDIMMs, non-ECC memory, speeds above 4800 MT/s or capacities beyond a single 128 GB DIMM should evaluate other options.

Highlights

  • 128GB DDR5 capacity scales server workloads
  • 4800MHz speed with CL40 latency processes data efficiently
  • 1V operation reduces power draw per module
  • ECC registered design protects data integrity under load
  • Validated for SuperMicro CloudDC SYS-621C-TN12R SYS-611C-TN4R SYS-121C-TN2R

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K1
Capacity128GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (1X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the 288-pin DDR5 RDIMM fit the SuperMicro CloudDC SuperServer SYS-621C-TN12R memory slots?

Yes, this module is built to the DDR5 RDIMM form factor and matches the pinout and keying used by the SYS-621C-TN12R memory slots.

What is the correct way to seat the 1Rx4 registered DIMM so the ECC register initialises?

Align the notch with the slot key, press straight down until both retention clips click, then verify in BIOS that the module reports 4800 MT/s and ECC active.

When should the 128 GB module be replaced based on ECC health monitoring?

Replace the module if the system logs show increasing correctable ECC error counts or if a firmware update changes the supported memory configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.