NEMIX RAM 128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V CL52 288-PIN ECC RDIMM memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128 GB DDR5 5600 registered ECC RDIMM at CL46 1.1 V, 4Rx4, validated for the Supermicro X14SDI-36C-SP3F motherboard
This registered DDR5 module delivers 128GB at 5600 MT/s with CL46 latency and 1.10V operation. It targets administrators upgrading the Supermicro X14SDI-36C-SP3F motherboard where exact rank, voltage and timing compliance are required for full-capacity recognition.
The 288-pin RDIMM form factor matches the board's registered DIMM slots and cannot be used in UDIMM or SODIMM sockets. A registered buffer reduces electrical load on the memory controller, allowing every populated slot to run at the rated 5600 speed without signal degradation.
DDR5 at 5600 MT/s provides the bandwidth ceiling for this module; population rules in the motherboard manual dictate maximum supported capacity per channel. ECC corrects single-bit errors on the fly, but uncorrectable multi-bit errors still require a reboot. Consult the system manual for approved DIMM configurations before installation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
It operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X14SDI-36C-SP3F memory controller specification.
A single 288-pin DDR5 RDIMM slot; the module is a registered DIMM with no heat spreader, so it fits the board's standard RDIMM sockets.
Power down, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips lock, then verify in BIOS that the full 128 GB is recognised at 5600 MT/s with ECC active.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?