We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green DDR5 RDIMM module with black chips, no heat spreader, 288 gold pins

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 ECC RDIMM SuperMicro B13SEG memory upgrade

SKU CH-XG3Y-ZZ9VG

A single 128 GB DDR5 5600 ECC RDIMM module, registered with 4Rx4 organisation and CL46 timing at 1.1 V, validated for SuperMicro B13SEG motherboards

  • Capacity128GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128GB capacity supports large server workloads
  • DDR5 5600 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 10V operation reduces power consumption
  • Validated for SuperMicro B13SEG motherboard compatibility

128GB DDR5 5600 ECC RDIMM Module

This NEMIX RAM module provides 128GB of DDR5 5600 registered ECC memory in a single 288-pin RDIMM. It operates at 1.1V with CL46 latency and uses a 4Rx4 organisation built from major OEM chips. The kit is validated for SuperMicro B13SEG server motherboards.

Verify Motherboard Slot And Rank Support

Confirm the SuperMicro B13SEG board accepts 288-pin DDR5 RDIMMs and supports 4Rx4 registered modules at 5600MT/s. Check the system documentation for maximum capacity per slot and total population rules before ordering. Ensure the platform requires registered ECC memory rather than unbuffered or UDIMM types.

Suits SuperMicro B13SEG Capacity Upgrades

This module suits administrators expanding memory on compatible SuperMicro B13SEG platforms that require registered ECC RDIMMs. It is not for systems limited to UDIMM or lower-rank configurations. Buyers needing non-ECC, unbuffered or different form-factor memory should look elsewhere.

Highlights

  • 128GB capacity supports large server workloads
  • DDR5 5600 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 10V operation reduces power consumption
  • Validated for SuperMicro B13SEG motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-744K1
Capacity128GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (1X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the kit contain only the 128 GB 288-pin DDR5 RDIMM or are extra cables or brackets included?

The package contains one 128 GB DDR5 5600 CL46 1.1 V 4Rx4 registered ECC RDIMM and nothing else.

Should I choose the 5600 MT/s CL46 version or a slower 4800 MT/s module for the SuperMicro B13SEG?

The 5600 MT/s CL46 module is the specified speed for this kit; it will run at the platform's supported rate.

What does the 5600 MT/s PC5-44800 rating mean once the DIMM is installed in the server?

It indicates a peak transfer rate of 44 800 MB/s at 5600 MT/s with CL46 latency at 1.1 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.