We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM modules, 260-pin, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM Kit POSIFLEX RT-5115 memory upgrade

SKU CH-HQRF-M6Y4N

A 16GB DDR4 SODIMM kit with two 8GB modules running at 2133MHz CL15 for the POSIFLEX RT-5115 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts terminal responsiveness
  • DDR4 2133 MHz matches POSIFLEX RT-5115 specs
  • CL15 latency keeps transactions snappy
  • 2 V operation reduces heat in compact chassis
  • 260-pin SODIMM drops in without adapters

NEMIX RAM 16GB DDR4 SODIMM Kit

This kit provides 16GB of DDR4 memory in a matched pair of 8GB modules. It is built for the POSIFLEX RT-5115 terminal and similar point-of-sale systems that require SODIMM format. The modules run at 2133MHz with CL15 latency.

Check your terminal has two free SODIMM slots

Verify the system accepts 260-pin DDR4 SODIMMs at 1.2V without ECC or registered buffering. The existing memory should match the PC4-17000 speed grade for best stability. Consult the service manual for the exact slot layout before opening the chassis.

Fits standard SODIMM sockets in compatible POS units

The low-profile modules sit flush without a heat spreader, leaving room for tight internal clearances. Dual-rank 2Rx8 organisation helps utilise both memory channels when both slots are populated. No extra power cables or cooling are required beyond the slot supply.

Highlights

  • 16 GB kit boosts terminal responsiveness
  • DDR4 2133 MHz matches POSIFLEX RT-5115 specs
  • CL15 latency keeps transactions snappy
  • 2 V operation reduces heat in compact chassis
  • 260-pin SODIMM drops in without adapters

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

What comes in the box and is anything else required for installation?

The kit contains two 8 GB DDR4 2133 CL15 260-pin SODIMM modules totalling 16 GB; no extra parts are needed for a compatible POSIFLEX RT-5115 terminal.

Which capacity or version should I pick for the POSIFLEX RT-5115?

This 16 GB kit (2 x 8 GB) matches the part number MS17000-828K2 and is built for the RT-5115; choose it when that exact capacity and speed are specified for your terminal.

What does the 2133 MHz rating mean once the memory is installed?

The modules run at DDR4 2133 (PC4-17000) with CL15 latency at 1.20 V, delivering the rated throughput and timing the RT-5115 expects from qualified SODIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.