SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB dual-channel DDR4 ECC UDIMM kit running at 2666 MHz with CL19 latency for ASUS Lockerstor NAS
This 16 GB kit contains two 8 GB DDR4 2666 CL19 ECC unbuffered UDIMMs built for the ASUS LOCKERSTOR AS-8GECD4-U. The modules run at 1.2 V and use a 288-pin layout with 1Rx8 organisation. Major OEM chips from Samsung, Micron or Hynix provide error-correcting protection for stored data. The kit targets NAS owners who need validated ECC memory for file serving, backup or virtualization workloads.
Replacing standard unbuffered DDR4 without ECC adds single-bit error correction that protects against silent data corruption in ZFS or Btrfs pools. Moving from a single 8 GB module to this dual-channel 16 GB kit doubles bandwidth and capacity for heavier multi-user workloads. The jump is worthwhile when the NAS logs correctable errors, runs containers or serves many concurrent SMB connections. Builders who need more than 16 GB or registered DIMM support should look elsewhere.
ECC scrubbing and background parity checks run for hours without the error rate climbing, because the modules maintain CL19 timing at 1.2 V across sustained read and write streams. Unbuffered topology keeps latency low for random I/O in database or virtual-machine workloads. Absence of a heat spreader means airflow in the LOCKERSTOR chassis must be adequate; thermal throttling can appear if the NAS bay fans are restricted or dust-clogged.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS LOCKERSTOR NAS Memory |
| Model | ASUS LOCKERSTOR NAS Memory |
| Part Number | ME21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
Yes, the 288-pin DDR4 ECC UDIMM form factor matches the DIMM slots used in compatible ASUS Lockerstor models such as the AS-8GECD4-U.
Power off the NAS, open the chassis, align each module's notch with the slot key, press firmly until the retention clips click, then verify both 8GB sticks are recognised in the BIOS before closing the case.
No firmware updates are required for the memory itself; ECC UDIMMs are solid-state with no moving parts, so they do not have a scheduled replacement interval under normal operation.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?