We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX ZT-3115E

SKU CH-RWC6-X7RQA

16 GB dual-channel DDR4 3200 CL22 SODIMM kit for POSIFLEX ZT-3115E terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 kit boosts POS terminal responsiveness
  • 3200 MHz PC4-25600 speed handles transaction workloads
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115E slots
  • Two 8 GB modules enable dual-channel bandwidth

POSIFLEX ZT-3115E DDR4 SODIMM Kit

This 16GB kit contains two 8GB DDR4 3200 modules built specifically for the POSIFLEX ZT-3115E Haydn ZT Series POS terminal. It targets retailers and system integrators who need reliable memory for point-of-sale workloads. The 260-pin SODIMM form factor matches the terminal's memory slots exactly.

Tool-free slot access in minutes

The SODIMM modules insert directly into the terminal's memory slots without tools or cables. Common issues include forcing a module at the wrong angle, which can bend the 260-pin connector, or mixing this kit with existing memory of a different speed or latency. Always power down and disconnect the terminal before starting.

CL22 latency at 1.20V operation

The kit runs at CAS latency 22 with a standard 1.20V supply, matching the terminal's memory controller requirements. This timing and voltage combination is the single specification that confirms compatibility with the POSIFLEX ZT-3115E system. Builders needing ECC, registered modules, or a different latency should look elsewhere.

Highlights

  • 16 GB DDR4 kit boosts POS terminal responsiveness
  • 3200 MHz PC4-25600 speed handles transaction workloads
  • CL22 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits POSIFLEX ZT-3115E slots
  • Two 8 GB modules enable dual-channel bandwidth

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Questions about this item

How do I confirm the kit runs at 3200 MT/s with CL22 after installation?

Open Task Manager or CPU-Z and verify the memory tab shows 3200 MT/s speed and CL22 timings at 1.20 V.

What comes in the box and is anything else required?

The box contains two 8 GB 260-pin DDR4 SODIMM modules; no extra parts or tools are needed for the POSIFLEX ZT-3115E.

Which capacity should I choose for the ZT-3115E?

This 16 GB kit (2 x 8 GB) is the matched set validated for the POSIFLEX ZT-3115E.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.