We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 ECC UDIMM Kit memory upgrade

SKU CH-AN2R-FRDQG

A 16 GB kit of DDR4 3200 ECC UDIMM memory with CL22 latency and 1.2 V operation for compatible ASUS workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit expands workstation memory
  • DDR4 3200 MT/s speed supports high-throughput workloads
  • ECC unbuffered design detects and corrects single-bit errors
  • 2 V operation reduces power draw under load
  • Validated for ASUS Pro WS WRX80E-SAGE SE WiFi motherboard

Targeted DDR4 ECC upgrade

This 16 GB kit uses two 8 GB UDIMMs validated for the ASUS Pro WS WRX80E-SAGE SE WiFi motherboard. ECC unbuffered operation protects data integrity in workstation workloads. Modules run at DDR4 3200 with CL22 timing at 1.2 V.

Thermals and power in normal use

Bare modules without heat spreaders rely on chassis airflow to stay cool. Standard 1.2 V DDR4 voltage keeps power draw low during typical server or workstation duty. No active cooling is required beyond normal case ventilation.

What the kit changes

Matched pair enables dual-channel bandwidth on the supported platform. ECC capability adds single-bit error correction for mission-critical applications. Lifetime replacement warranty from the manufacturer backs long-term reliability.

Highlights

  • 16 GB dual-channel kit expands workstation memory
  • DDR4 3200 MT/s speed supports high-throughput workloads
  • ECC unbuffered design detects and corrects single-bit errors
  • 2 V operation reduces power draw under load
  • Validated for ASUS Pro WS WRX80E-SAGE SE WiFi motherboard

Specifications

BrandNEMIX RAM
SeriesASUS Server Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How do I install the 288-pin DDR4 ECC UDIMM kit in the ASUS Pro WS WRX80E-SAGE SE WiFi motherboard, and what step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both side clips click, then verify in BIOS that both 8 GB sticks run at 3200 MT/s with ECC enabled; the step most often missed is seating the second module fully so its clips engage.

What maintenance or replacement will the 1Rx8 ECC UDIMM kit need over time?

No routine maintenance is required; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a system upgrade demands higher capacity or a newer DDR generation.

What limit appears first on the CL22 1.2 V kit during sustained workloads?

The CL22 latency at 3200 MT/s sets the throughput ceiling long before the 1.2 V unbuffered modules hit thermal or power limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.