We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM sticks, no heat spreaders, 288-pin

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 UDIMM Gigabyte TRX40 AORUS Xtreme memory upgrade

SKU CH-BN1D-4Z09G

Dual-channel 16 GB DDR4-3200 CL22 kit validated for Gigabyte TRX40 AORUS Xtreme

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 MT/s CL22 matches motherboard spec
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Tested compatible with Gigabyte TRX40 AORUS Xtreme

Compatible DDR4 Kit for Gigabyte TRX40

This 16GB kit contains two 8GB DDR4 3200 modules tested for the Gigabyte TRX40 AORUS Xtreme motherboard. They run at 1.2V with CL22 latency and use a standard 288-pin UDIMM layout. The kit is sold new and ready for immediate installation.

Builders Using This Specific Motherboard

The memory targets owners of the Gigabyte TRX40 AORUS Xtreme who need a straightforward capacity increase. It is not ECC or registered, so it will not satisfy workflows that require error correction or registered DIMMs. Systems needing more than 16GB or a different pin count should look elsewhere.

288-Pin DDR4 UDIMM Form Factor

The modules use the 288-pin DDR4 UDIMM standard, which fits only DDR4 desktop sockets. Buyers with DDR5 or laptop SO-DIMM slots cannot use this kit. Verify the motherboard memory slot type before purchasing.

Highlights

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 3200 MT/s CL22 matches motherboard spec
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Tested compatible with Gigabyte TRX40 AORUS Xtreme

Specifications

BrandNEMIX RAM
SeriesGigabyte Gaming Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Will the 288-pin DDR4 UDIMM modules fit the four memory slots on the Gigabyte TRX40 AORUS Xtreme motherboard?

Yes, each 8 GB stick is a standard 288-pin DDR4 UDIMM that installs directly into the board's DDR4 DIMM slots.

What is the correct way to seat the two modules so the system boots at 3200 MT/s with CL22 timing?

Insert each module vertically until the retention clips click; populate the slots recommended in the motherboard manual for dual-channel operation, then enable the XMP profile in BIOS to reach 3200 MT/s CL22.

Do these non-ECC unbuffered DIMMs require any firmware updates or periodic replacement to maintain stability?

No firmware updates are needed for the memory itself; the modules are validated for continuous operation at 1.20 V and do not have a scheduled replacement interval.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.