We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM sticks with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 ECC RDIMM CL22 THINKMATE QF4-14TP memory upgrade

SKU CH-RQ9J-M7064

16 GB DDR4-3200 ECC registered dual-rank kit for ThinkMate QF4-14TP workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit expands workstation capacity
  • DDR4 3200 speed with CL22 timing supports demanding workloads
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation keeps power draw low for server stability
  • Validated for ThinkMate QF4-14TP ensures reliable compatibility

Compatibility & Capacity

This 16GB DDR4 kit contains two 8GB registered ECC RDIMM modules validated for the Thinkmate QF4-14TP workstation. It runs at 3200MHz with a CL22 latency and operates at the standard 1.2V level. The memory uses major OEM chips from Samsung, Micron or Hynix and presents a 1Rx8 organisation across 288 pins.

Suitability

It suits administrators upgrading or populating Thinkmate QF4-14TP systems that require registered ECC memory for data-integrity workloads. Builders needing unbuffered UDIMMs, non-ECC modules, higher frequencies, lower latencies or larger single-module capacities should look at something else.

Installation Notes

The 288-pin RDIMM form factor installs in the standard DDR4 server slots of the compatible workstation; no heat spreader is fitted, so clearance is minimal. The usual issues are mixing registered with unbuffered DIMMs, exceeding the platform's supported rank population per channel or forgetting to enable ECC in the system BIOS after installation.

Highlights

  • 16 GB dual-channel kit expands workstation capacity
  • DDR4 3200 speed with CL22 timing supports demanding workloads
  • ECC registered design protects data integrity in critical tasks
  • 2 V operation keeps power draw low for server stability
  • Validated for ThinkMate QF4-14TP ensures reliable compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the THINKMATE QF4-14TP workstation need to support ECC and registered DIMMs for this 288-pin DDR4 3200 kit to function?

Yes, this 16GB kit is ECC RDIMM registered memory; the host system must accept both ECC and registered modules for it to operate.

If the QF4-14TP already has DDR4 ECC RDIMMs installed, will this 1Rx8 CL22 kit run at the speed of the slowest modules present?

The memory controller will negotiate a common speed and timing; all populated slots will run at the lowest supported frequency and highest latency among the installed DIMMs.

After installing both 8GB modules, how can I confirm the system recognises the full 16GB capacity at DDR4 3200?

Check the BIOS memory summary or operating-system memory report; it should show 16GB total, DDR4 3200 speed, ECC enabled, and registered mode active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.