We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR3 1866 ECC RDIMM 288-PIN CL13 1.5V memory upgrade

SKU CH-Q28C-1ERYB

16 GB DDR3 1866 ECC registered DIMM for Cisco UCS B200 M3 servers, CL13 at 1.5 V

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 16 GB DDR3 capacity expands server memory headroom
  • 1866 MT/s speed matches Cisco B200 M3 specifications
  • ECC registered design protects data integrity under load
  • CL13 latency at 1.5 V delivers stable timing
  • Major OEM chips ensure broad Cisco UCS compatibility

Cisco Server Memory Upgrade

This 16GB DDR3 1866 module is built for Cisco UCS B-Series B200 M3 servers. It delivers registered ECC reliability for mission-critical workloads. The single 16GB stick uses a 2Rx4 organisation and runs at 1.5V. It matches the Cisco UCS-MR-1X162RZ-A part number for direct replacement.

Sustained Load Behaviour

Registered buffering and ECC correction keep data integrity stable during continuous server operations. The CL13 latency supports consistent throughput under heavy multi-threaded demand. Samsung, Micron or Hynix chips provide enterprise-grade endurance. Modules are stress tested under load before shipping.

Compatibility Check

Verify your system requires 288-pin DDR3 RDIMMs and not 204-pin SODIMMs. Confirm the motherboard accepts 1.5V registered ECC modules at 1866MHz. Check available DIMM slots and maximum capacity per channel. Ensure the BIOS supports this density and rank configuration.

Highlights

  • 16 GB DDR3 capacity expands server memory headroom
  • 1866 MT/s speed matches Cisco B200 M3 specifications
  • ECC registered design protects data integrity under load
  • CL13 latency at 1.5 V delivers stable timing
  • Major OEM chips ensure broad Cisco UCS compatibility

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR3 1866MHZ ECC RDIMM Registered Server Memory
Part NumberMR14900-624K1
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemCisco
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx4
FeaturesDDR3 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR3 1866MHZ PC3-14900 2Rx4 1.5V 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How much power does the 1.5V DDR3 1866 module draw under continuous load?

The module operates at 1.35V, reducing power draw and heat compared to standard 1.5V DDR3 while running at 1866MHz all day.

What server slot and chipset are required to install this 288-pin ECC RDIMM?

It needs a DDR3 RDIMM slot with registered memory support, such as the Cisco UCS B200 M3 motherboard that accepts 2Rx4 modules.

Will this registered ECC stick work alongside older unbuffered DDR3 DIMMs in the same system?

No, registered and unbuffered DDR3 cannot be mixed; the motherboard requires all slots to use registered ECC modules like this 2Rx4 part.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.