We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V UDIMM memory upgrade

SKU CH-XA8W-PDBB8

16GB DDR4 2400 CL17 UDIMM desktop memory upgrade with Samsung-compatible 2Rx8 chips

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2400 speed matches system memory bus
  • CL17 latency supports responsive application loads
  • 2 V operation keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots

Samsung Compatible 16GB DDR4 Module

This 16GB DDR4 UDIMM is built for desktop PCs that require Samsung-compatible memory. It targets system builders and IT professionals who need a straightforward capacity increase without ECC or registered buffering. The single-module design fits standard 288-pin slots and runs at the JEDEC 1.2V level.

2400MHz Speed with CL17 Latency

Rated at 2400MHz (PC4-19200) with a CAS latency of 17, the module delivers baseline DDR4 throughput for everyday workloads and light multitasking. The 2Rx8 organisation provides standard density for this capacity. Headroom is limited to the rated JEDEC speed; the module does not support XMP profiles or higher factory frequencies.

No Heat Spreader or Software Included

The package contains only the memory module itself; there is no heat spreader, lighting or bundled software. Installation relies on the motherboard SPD data for automatic timing configuration. Buyers who need active cooling, RGB control utilities or multi-kit matching should look elsewhere.

Highlights

  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2400 speed matches system memory bus
  • CL17 latency supports responsive application loads
  • 2 V operation keeps power draw low
  • 288-pin UDIMM fits standard desktop DIMM slots

Specifications

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Will this 2400 MHz DDR4 UDIMM run reliably alongside my existing DDR4 modules?

The module operates at 1.2 V with CL17 timing. When mixed with slower DDR4 the system will run all sticks at the lowest common speed and latency, so stability depends on your motherboard's memory controller.

How can I verify the 16 GB stick is recognised at 2400 MHz and CL17 after installation?

Open Task Manager or BIOS and confirm the installed capacity shows 16 GB, the speed reads 2400 MT/s and the CAS latency reports 17.

Does the package include only the 288-pin UDIMM or are any cables or brackets supplied?

The box contains the single 16 GB 288-pin DDR4 UDIMM. No cables, brackets or additional accessories are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.