We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board DDR4 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 ECC RDIMM 1Rx4 CL17 1.2V 288-Pin Dell PowerEdge FC430

SKU CH-BMYS-ZTD91

16 GB DDR4 2400 ECC registered RDIMM, CL17 1.2 V, single-rank 1Rx4, validated for Dell PowerEdge FC430 servers

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity
  • Registered design stabilises heavy server workloads
  • 16 GB capacity expands Dell PowerEdge FC430 memory
  • DDR4 2400 speed matches system specifications
  • 2 V operation reduces power draw

Dell PowerEdge FC430 compatible DDR4 ECC RDIMM

This registered DDR4 module is built for the Dell PowerEdge FC430 server platform. It provides 16 GB of ECC memory in a single 288-pin DIMM. System administrators upgrading blade density or replacing failed sticks can install it without changing existing memory configurations.

16 GB single-rank capacity at DDR4 2400 CL17

The module runs at 2400 MT/s with CAS latency 17 and 1.20 V. One 1Rx4 rank fills a single slot, leaving remaining channels open for further expansion. Workloads that exceed 16 GB per channel will require additional DIMMs to avoid swapping.

Ships as a single tested 16 GB stick

The package contains one 16 GB RDIMM validated for the FC430. No heat spreader, cables, software licences or mounting hardware are included. Installation follows the server’s standard memory-replacement procedure documented in the Dell service manual.

Highlights

  • ECC protection guards data integrity
  • Registered design stabilises heavy server workloads
  • 16 GB capacity expands Dell PowerEdge FC430 memory
  • DDR4 2400 speed matches system specifications
  • 2 V operation reduces power draw

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-614K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will this 2400 MHz ECC RDIMM run alongside slower DDR4 modules already in my PowerEdge FC430?

Mixing speeds forces all channels to the slowest module; the server will clock everything down to the lowest installed speed.

How can I confirm the 1Rx4 registered module is detected at 2400 MHz with CL17 after installation?

Check the BIOS memory information page or run a tool such as CPU-Z to verify speed, rank, CAS latency and ECC status.

Does the single 16 GB stick ship with any extra brackets, cables or a heat spreader?

The package contains only the 288-pin RDIMM itself; no heat spreader, brackets or cables are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.