We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin

SKU CH-7WWR-NVQYY

16 GB DDR4 ECC SODIMM at 2400 MHz with CL17 latency for laptops and NAS devices

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4 2400 MHz CL17 boosts laptop responsiveness
  • ECC protection detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM fits standard laptop, AIO, SFF and NAS slots
  • Unbuffered design keeps latency low for everyday workloads

16 GB DDR4 ECC SODIMM for laptops and NAS

This 16 GB DDR4 2400 ECC SODIMM is built for laptops, all-in-one PCs, small-form-factor systems and NAS devices that require error-correcting unbuffered memory. It suits IT professionals and enthusiasts who need data integrity in compact or storage-focused platforms.

Install by inserting the 260-pin module into

Installation typically takes minutes and only requires seating the module firmly until the retention clips engage. The most common issue is attempting to use this ECC unbuffered stick in a system that expects non-ECC or registered memory, which will prevent boot or disable the module.

ECC unbuffered operation at 1.2 V decides

The module runs at DDR4 2400 (PC4-19200) with CL17 latency and 1.20 V. Your platform must explicitly support DDR4 ECC unbuffered SO-DIMMs; consumer laptops without ECC support in the chipset or BIOS will not recognise the error-correction function and may refuse to post.

Highlights

  • 16 GB DDR4 2400 MHz CL17 boosts laptop responsiveness
  • ECC protection detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM fits standard laptop, AIO, SFF and NAS slots
  • Unbuffered design keeps latency low for everyday workloads

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory
ModelDDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMSE19200-628K1
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Questions about this item

How do I confirm the 260-pin DDR4 ECC SODIMM is running at 2400 MHz with CL17 after installation?

Open Task Manager or your BIOS/UEFI memory tab and verify the reported speed shows 2400 MHz and CAS latency reads 17; ECC status will appear as enabled if the platform supports it.

What comes with the single 16 GB module and what must I source separately?

The box contains one 260-pin DDR4 ECC unbuffered SODIMM rated at 1.2 V; no heat spreader, tools or additional cables are included.

Which capacity and rank option should I pick for a laptop that accepts 2Rx8 PC4-19200 modules?

Choose the 16 GB 2Rx8 variant (part MSE19200-628K1) — it matches the 2400 MHz PC4-19200 spec and dual-rank organisation your system requires.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.