We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 SODIMM POSIFLEX RT-6116 memory upgrade

SKU CH-T83X-FP9G1

16 GB DDR4 2400 SODIMM for POSIFLEX RT-6116, CL17, 1.2 V, 260-pin, non-ECC

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity boosts POS terminal multitasking
  • DDR4 2400 MHz speed matches system specification
  • CL17 latency at 1.2 V for stable operation
  • 260-pin SODIMM form factor fits POSIFLEX RT-6116
  • Major OEM chips ensure reliable compatibility

POSIFLEX RT-6116 memory upgrade

This 16 GB DDR4 2400 SODIMM is built specifically for the POSIFLEX RT-6116 terminal. It uses a 260-pin unbuffered non-ECC layout at 1.20 V to match the platform's memory controller. The module targets technicians who need a direct-fit replacement without configuration changes.

Sustained workload stability

Each stick is stress-tested under load using major OEM Samsung, Micron or Hynix chips before it ships. The 2Rx8 organisation and CL17 timing keep latency predictable during long transaction windows. Operation stays within the standard DDR4 voltage envelope so thermals remain consistent over extended shifts.

Tool-free slot access

The SODIMM form factor slides into the terminal's memory door without removing the main chassis. Align the notch on the 260-pin edge connector, press until the side clips engage, then replace the cover. The only common error is inserting the module at an angle, which can bend the gold contacts and prevent the system from posting.

Highlights

  • 16 GB capacity boosts POS terminal multitasking
  • DDR4 2400 MHz speed matches system specification
  • CL17 latency at 1.2 V for stable operation
  • 260-pin SODIMM form factor fits POSIFLEX RT-6116
  • Major OEM chips ensure reliable compatibility

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.20V DDR4 SODIMM add noticeable heat or fan noise when the POSIFLEX RT-6116 runs continuously?

The module operates at the standard 1.20V DDR4 voltage with no heat spreader, so it adds minimal thermal load and no active cooling of its own; system fan behaviour stays governed by the terminal's own firmware.

What must the POSIFLEX RT-6116 already have for this 260-PIN CL17 stick to be recognised?

An available DDR4 SODIMM slot that accepts 2Rx8 PC4-19200 non-ECC unbuffered memory and a BIOS that supports 16 GB single-rank modules at 2400 MT/s.

Will this 16 GB PC4-19200 module down-clock reliably if the RT-6116 currently runs slower DDR4?

Yes, DDR4 SODIMMs are backward compatible; the stick will run at the highest speed the terminal's memory controller allows, up to its rated 2400 MT/s CL17.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.