We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC RDIMM 1Rx4 CL19 memory upgrade

SKU CH-JT8Y-KQDW5

16 GB DDR4 2666 ECC registered DIMM for Micron servers, CL19 1.2 V 1Rx4 288-pin

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity on dense server boards
  • 2666 MT/s throughput matches PC4-21300 platform specs
  • 2 V operation reduces power draw per module
  • Single-rank 1Rx4 layout optimises density for 16 GB capacity

Server-grade ECC RDIMM

This 16 GB DDR4 2666 registered DIMM adds error-correcting capacity to compatible Micron-based servers and workstations. It targets IT professionals who need validated stability for mission-critical workloads. The single-rank 1Rx4 organisation keeps electrical loading low on populated channels.

Registered buffer and 1.2 V operation

The on-module register reduces signal load on the memory controller, allowing larger populations per channel without timing compromise. Standard 1.2 V DDR4 voltage fits existing server power budgets and requires no special BIOS tuning. ECC circuitry corrects single-bit errors before they reach the operating system.

16 GB per module headroom

One 288-pin RDIMM delivers 16 GB at CL19 latency, suited to virtualisation hosts and database nodes that benefit from registered ECC integrity. Capacity scales by adding identical modules to free slots; mixed-rank or unbuffered DIMMs are not supported on the same channel.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity on dense server boards
  • 2666 MT/s throughput matches PC4-21300 platform specs
  • 2 V operation reduces power draw per module
  • Single-rank 1Rx4 layout optimises density for 16 GB capacity

Specifications

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-614K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the CL19 latency become a bottleneck under sustained server workloads?

CL19 is the rated CAS latency for this DDR4 2666 module; sustained throughput depends on the platform memory controller and rank configuration.

Does the registered design and 1.20 V operation keep thermals manageable in a fully populated chassis?

The 1Rx4 registered RDIMM runs at standard 1.20 V without a heat spreader; airflow across the DIMM slots is the primary cooling path.

Must the motherboard support ECC RDIMM and 288-pin DDR4 slots to use this module?

Yes, the module requires a server or workstation board with DDR4 RDIMM slots and ECC enabled in the BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.