SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB DDR4 2666 MHz ECC unbuffered SODIMM for Synology DS2419+II NAS upgrades
This 16 GB DDR4 2666 MHz ECC unbuffered SODIMM is built for the Synology DiskStation DS2419+II. It adds error-correcting memory to a NAS that runs 24/7 workloads such as file serving, backup and virtualization. The module uses major OEM chips from Samsung, Micron or Hynix and carries part number MSE21300-628K1. It targets administrators who need validated compatibility rather than generic consumer memory.
Operating at 1.20 V, the module draws minimal power and produces little heat inside the sealed NAS chassis. No heat spreader is fitted, so airflow from the system fans passes directly over the DRAM packages. The low voltage and unbuffered design keep acoustic impact negligible during sustained read and write cycles. Power consumption stays within the platform's standard memory budget without extra cooling requirements.
The package contains one 260-pin SODIMM rated CL19 2Rx8 with no additional cables, tools or software. Compatibility is verified for the DS2419+II, reducing the risk of POST failures or data corruption that can occur with unqualified sticks. Installers simply insert the module into an available slot following the NAS manual. No firmware updates or configuration utilities are supplied or required.
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered SODIMM |
| Part Number | MSE21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 ECC SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM |
Power off the NAS, remove the cover, align the notch on the 260-pin module with the slot key, press firmly until the side clips click, then replace the cover before powering on; the step often missed is fully seating the module so both clips engage.
No routine maintenance is required; the module has no heat spreader and runs at 1.20V, so only a future capacity upgrade or a rare failure would prompt replacement.
The memory controller caps throughput at the 2666MHz JEDEC rating, so sustained heavy workloads hit that bandwidth ceiling before thermal or voltage limits become a factor.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?