We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC SODIMM CL21 1.2V 260-pin

SKU CH-KWXZ-48GPS

16 GB DDR4 2933 MHz ECC SODIMM with CL21 latency and 1.2 V operation for laptops, AIOs and NAS devices

  • Capacity16GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • 16GB capacity for demanding workloads
  • DDR4 2933 speed for responsive performance
  • ECC protection guards against data errors
  • 20V operation reduces power draw
  • 260-pin SODIMM fits laptops and compact systems

16 GB DDR4 ECC SODIMM for Laptops and NAS

This 16 GB DDR4 2933 MHz module adds error-correcting memory to compatible laptops, all-in-one PCs, small-form-factor desktops and NAS appliances. It runs at 1.2 V with CL21 latency and uses the standard 260-pin SO-DIMM form factor. The unbuffered design keeps installation straightforward for system integrators and home builders alike.

ECC support on an unbuffered SODIMM

Error-correcting code is the decisive feature here: it detects and corrects single-bit errors that can corrupt data in always-on NAS units or workstations running long compute jobs. The module is unbuffered, so it fits the memory controllers found in most consumer and prosumer platforms that accept ECC SODIMMs. Without ECC the system cannot protect against silent data corruption.

Fits 260-pin DDR4 slots at 1.2 V

The stick plugs directly into any DDR4 SO-DIMM socket wired for 260-pin operation at 1.2 V, requiring no extra cooling or voltage adjustment. It frees the single slot it occupies for a 16 GB capacity boost while leaving other slots open for matching modules. Buyers who need registered DIMMs, non-ECC memory or DDR5 speeds cannot use this part.

Highlights

  • 16GB capacity for demanding workloads
  • DDR4 2933 speed for responsive performance
  • ECC protection guards against data errors
  • 20V operation reduces power draw
  • 260-pin SODIMM fits laptops and compact systems

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory
ModelDDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMSE23400-628K1
Capacity16GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Questions about this item

Will the 2933 MHz rating actually run at that speed in my laptop?

The module is rated for DDR4 2933 (PC4-23400). Your system's memory controller and BIOS determine the final speed; many laptops will operate it at the highest supported frequency up to 2933 MHz.

Does the ECC function work on a standard consumer laptop?

This is an unbuffered ECC SODIMM. ECC correction is only active when the platform's chipset and BIOS support it; most consumer laptops ignore the ECC bits and run the module as non-ECC memory.

Will the 260-pin stick fit my slim ultrabook or NAS bay?

It uses the standard 260-pin DDR4 SO-DIMM form factor with no heat spreader, so it fits the majority of laptop, all-in-one, small-form-factor and NAS slots that accept DDR4 SO-DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.