We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2933MHz ECC RDIMM Dell PowerEdge M640 VRTX

SKU CH-CP58-HRTX6

16 GB DDR4 2933 MHz ECC registered DIMM for Dell PowerEdge M640 and VRTX servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2933 MHz ECC RDIMM for Dell PowerEdge M640 VRTX
  • Registered 2Rx8 design with CL21 latency at 1.2 V
  • 288-pin PC4-23400 module built with Samsung, Micron or Hynix chips
  • System-specific compatibility removes guesswork for server upgrades
  • Single 16 GB stick simplifies capacity scaling in Dell platforms

Dell PowerEdge M640 VRTX Memory

This 16GB DDR4 2933MHz ECC RDIMM is built for the Dell PowerEdge M640 VRTX server platform. It targets administrators who need registered error-correcting memory to maintain data integrity in a compatible blade or converged system.

Single-Module Upgrade Path

The package contains one 16GB stick, so capacity grows in 16GB increments per available slot. Registered signalling and ECC let the platform correct single-bit errors without adding unbuffered modules that the system cannot accept.

DDR4 2933MHz CL21 Registered

The module runs at DDR4 2933 (PC4-23400) with CAS latency 21 at 1.2V in a 288-pin RDIMM form factor. This exact speed, voltage and registered type must match the server memory controller or the system will not post.

Highlights

  • 16 GB DDR4 2933 MHz ECC RDIMM for Dell PowerEdge M640 VRTX
  • Registered 2Rx8 design with CL21 latency at 1.2 V
  • 288-pin PC4-23400 module built with Samsung, Micron or Hynix chips
  • System-specific compatibility removes guesswork for server upgrades
  • Single 16 GB stick simplifies capacity scaling in Dell platforms

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 288-pin DDR4 RDIMM need any firmware updates or battery replacements over its service life?

No firmware or battery maintenance is required for this registered ECC module; it operates passively once installed in a compatible Dell PowerEdge M640 or VRTX system.

What thermal limit appears first when the 16 GB 2Rx8 module runs continuously at 2933 MT/s?

The module has no heat spreader, so the DRAM junction temperature reaches its rated maximum before any other component becomes a bottleneck under sustained load.

How much power does the 1.2 V registered DIMM draw and how much noise does it add when the server runs all day?

At 1.2 V the DIMM consumes only a few watts and adds no audible noise because it has no moving parts or active cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.