We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR4 UDIMM module, 288 pins, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 UDIMM memory upgrade

SKU CH-V27E-NAREQ

16 GB DDR4 3200 CL22 1.2 V UDIMM module validated for ASRock B660 motherboards

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 boosts desktop responsiveness
  • CL22 1.2V operation balances speed with efficiency
  • 2Rx8 288-pin UDIMM fits standard motherboard slots
  • Samsung Micron Hynix chips ensure module reliability
  • Tested for ASRock B660M series compatibility

16 GB DDR4-3200 UDIMM for ASRock B660M boards

This 16 GB DDR4 module runs at 3200 MT/s with CL22 latency at 1.20 V. It uses a 2Rx8 unbuffered non-ECC design on a 288-pin UDIMM form factor. The kit targets owners of ASRock B660M-HDV, B660M-ITX/ac and B660M-ITX/eDP motherboards who want a straightforward capacity increase.

Verify DDR4 slots and maximum supported speed

Your motherboard must accept 288-pin DDR4 UDIMMs and be able to run memory at 3200 MT/s or scale it down automatically. Confirm the board has a free slot and that the BIOS recognises 2Rx8 modules. Systems limited to lower frequencies will still work but will not reach the rated 3200 MT/s.

Fits a standard DDR4 desktop build alongside CPU

The module needs one vacant 288-pin DDR4 slot and draws 1.20 V from the board. No heat spreader is fitted so clearance under large air coolers is generous. Adding this stick leaves remaining slots open for further expansion and does not occupy M.2 or PCIe resources.

Highlights

  • 16GB DDR4 3200 boosts desktop responsiveness
  • CL22 1.2V operation balances speed with efficiency
  • 2Rx8 288-pin UDIMM fits standard motherboard slots
  • Samsung Micron Hynix chips ensure module reliability
  • Tested for ASRock B660M series compatibility

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does the single 16 GB UDIMM ship alone or with any extra parts?

The package contains one 16 GB DDR4 3200 CL22 1.2 V 2Rx8 288-pin UDIMM and nothing else.

Why choose this 16 GB 2Rx8 module instead of a single-rank alternative?

The 2Rx8 organisation gives two ranks on one stick, letting a dual-channel board reach full rank count with just two modules.

Will the advertised 3200 MT/s speed run automatically on an ASRock B660M board?

The module is JEDEC-standard DDR4 3200 at 1.2 V, so the motherboard will configure it at that speed without manual tuning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.