We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM POSIFLEX JK-2432 memory upgrade

SKU CH-ZQH5-9K4C1

16 GB DDR4 3200 SODIMM for POSIFLEX JK-2432 kiosk, CL22 1.2 V unbuffered non-ECC

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts POS kiosk responsiveness
  • CL22 timing at 1.2 V balances speed with low power draw
  • 2Rx8 dual-rank organisation improves memory bandwidth for multitasking
  • 260-pin SODIMM form factor fits POSIFLEX JK-2432 Cachet Series slots directly
  • Tested with Samsung, Micron or Hynix chips for reliable 24/7 operation

Targeted POS Upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX JK-2432 Cachet Series kiosk. It delivers a direct memory increase for point-of-sale terminals running demanding retail or hospitality software. The module installs in the single available slot without configuration changes.

DDR4 SODIMM Limits

The 260-pin DDR4 interface caps transfer rates at the JEDEC 3200 MT/s standard used here. Unbuffered, non-ECC operation means the memory controller handles all timing directly, so stability depends on the host firmware supporting the programmed CL22 latency at 1.2 V. No error correction or registered buffering is available on this form factor.

Deciding Specification

The 2Rx8 dual-rank organisation is the critical compatibility factor for the JK-2432 platform. If the kiosk requires a single-rank module this stick will not post, and if the slot is limited to 8 GB per rank the capacity will not be recognised. Verify the rank requirement before purchase.

Highlights

  • 16 GB DDR4 3200 MHz boosts POS kiosk responsiveness
  • CL22 timing at 1.2 V balances speed with low power draw
  • 2Rx8 dual-rank organisation improves memory bandwidth for multitasking
  • 260-pin SODIMM form factor fits POSIFLEX JK-2432 Cachet Series slots directly
  • Tested with Samsung, Micron or Hynix chips for reliable 24/7 operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Is the 16GB CL22 module the only capacity and latency option for the POSIFLEX JK-2432 Cachet Series?

Yes, this specific part number MS25600-628K1 is offered as a single 16GB module with CL22 latency for the POSIFLEX JK-2432 Cachet Series kiosk.

Will the DDR4 3200 speed actually run at 3200 MT/s inside the POSIFLEX JK-2432?

The module is rated at DDR4 3200 (PC4-25600), but the final operating speed depends on the kiosk's motherboard capabilities and BIOS settings.

Does the 260-pin SODIMM interface limit the bandwidth to PC4-25600 in this kiosk?

The 260-pin SODIMM form factor supports the DDR4 3200 PC4-25600 rating, so the interface does not impose a lower bandwidth ceiling than the module itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.