We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR4 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 1Rx4 CL22 1.2V 288-Pin Server Memory Upgrade

SKU CH-D25D-BZSPT

16 GB DDR4 3200 ECC registered RDIMM, 1Rx4 layout, 1.2 V, CL22, Hynix HMA82GR7CJR4N-XN compatible

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in critical workloads
  • Registered signal buffering stabilises heavy memory configurations
  • DDR4 3200 speed delivers 25600 MT/s bandwidth
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server slots

NEMIX RAM 16GB DDR4 ECC RDIMM

This 16GB DDR4 3200 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It runs at 1.2V with CL22 latency and uses a 1Rx4 Hynix-based configuration. The module fits 288-pin RDIMM slots in compatible Hynix systems.

Suits registered ECC platforms only

This module fits systems that accept DDR4 3200 ECC RDIMM memory with 1Rx4 organisation. It will not work in desktop boards that require unbuffered non-ECC DIMMs or in platforms limited to lower speeds. Buyers needing unbuffered memory or higher capacities per slot should look elsewhere.

1Rx4 registered ECC at DDR4 3200

The single-rank by four organisation combined with registered ECC operation at DDR4 3200 determines compatibility with specific server chipsets. Verify that your motherboard supports 1Rx4 registered modules at this speed before purchase.

Highlights

  • ECC protection guards data integrity in critical workloads
  • Registered signal buffering stabilises heavy memory configurations
  • DDR4 3200 speed delivers 25600 MT/s bandwidth
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server slots

Specifications

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-614K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What 288-pin DDR4 RDIMM slot does this 16 GB module fit?

It fits any standard DDR4 288-pin RDIMM slot on a server or workstation motherboard that supports registered ECC memory.

How is the MR25600-614K1 module installed, and what step is often missed?

Power down the system, open the chassis, align the notch on the 288-pin edge connector with the key in the slot, press firmly until both retention clips click, then enable ECC in the BIOS — the BIOS step is the one most people forget.

When should the 1.2 V DDR4 module be replaced in a server?

Replace it if memory diagnostics report uncorrectable ECC errors, the system logs repeated corrected errors, or the module fails to train at 3200 MT/s during POST.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.