We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 1.2V 288-Pin SuperMicro Compatible Memory Upgrade

SKU CH-M6E2-GAR35

16 GB DDR4 3200 ECC registered DIMM for Supermicro servers, CL22 1.2 V 288-pin

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 ECC RDIMM adds capacity for virtualisation workloads
  • Registered signal improves stability in multi-module SuperMicro servers
  • CL22 latency at 1.2 V balances throughput with low power draw
  • 2Rx8 organisation maximises density inside a single 288-pin slot
  • Major OEM DRAM chips tested under load for enterprise reliability

16GB DDR4 ECC RDIMM for SuperMicro

This 16GB registered DIMM uses DDR4 3200 technology with ECC and a 2Rx8 organisation. It is built for SuperMicro servers and workstations that require registered memory. The module operates at 1.2V with a CL22 latency profile.

Capacity and headroom: 16GB per module

A single 16GB stick adds substantial capacity to compatible SuperMicro platforms. The DDR4 3200 speed rating provides bandwidth for virtualisation, database and compute workloads. Systems needing more memory must populate additional slots with identical registered ECC modules.

Thermals, noise and power

The module runs at the standard 1.2V DDR4 voltage without a heat spreader. Power draw stays within typical registered DIMM limits for this density. No active cooling is required on the module itself; system airflow handles thermal dissipation in normal server operation.

Highlights

  • 16 GB DDR4 3200 ECC RDIMM adds capacity for virtualisation workloads
  • Registered signal improves stability in multi-module SuperMicro servers
  • CL22 latency at 1.2 V balances throughput with low power draw
  • 2Rx8 organisation maximises density inside a single 288-pin slot
  • Major OEM DRAM chips tested under load for enterprise reliability

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will this 2Rx8 3200MHz DDR4 RDIMM work alongside my existing 1Rx8 modules in a SuperMicro server?

Mixing 2Rx8 and 1Rx8 ranks is possible if your SuperMicro motherboard supports mixed-rank populations; check the manual for supported rank-per-channel limits.

How can I verify the ECC registered function is active after installing this CL22 module?

Enter the BIOS or run a hardware tool such as dmidecode; it should report the module as registered ECC DDR4-3200 with a CAS latency of 22.

Does the single 16GB stick ship with a heat spreader or do I need to buy cooling separately?

The module has no heat spreader; it relies on server chassis airflow, so no extra cooling accessory is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.