We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR4 RDIMM module with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 Supermicro H11SSW-iN EPYC

SKU CH-C4FS-MNB57

A 16 GB DDR4 3200 ECC registered DIMM built for Supermicro H11SSW-iN EPYC motherboards

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 ECC RDIMM for Supermicro EPYC servers
  • Registered 2Rx8 design with CL22 latency for stable throughput
  • 2 V operation reduces power draw in dense deployments
  • 288-pin DDR4 form factor fits H11SSW-iN motherboard slots
  • Samsung Micron Hynix chips tested under load for reliability

Server memory upgrade

This 16GB DDR4 3200 ECC RDIMM is built for the Supermicro H11SSW-iN motherboard and AMD EPYC platforms. It delivers registered, error-correcting memory for workloads that require data integrity and stable operation.

Thermals and power

The module runs at 1.2V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable under sustained use.

Upgrade context

It replaces non-ECC or lower-capacity RDIMMs in compatible Supermicro systems where registered memory is mandatory. The jump is worth it when adding ECC protection or moving to 16GB per slot for denser virtualization or database configurations.

Highlights

  • 16 GB DDR4 3200 ECC RDIMM for Supermicro EPYC servers
  • Registered 2Rx8 design with CL22 latency for stable throughput
  • 2 V operation reduces power draw in dense deployments
  • 288-pin DDR4 form factor fits H11SSW-iN motherboard slots
  • Samsung Micron Hynix chips tested under load for reliability

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install this 288-pin DDR4 RDIMM in my Supermicro H11SSW-iN and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both locking tabs click, then verify in BIOS that the 16 GB module runs at 3200 MT/s with ECC active.

What maintenance or replacement will this 16 GB ECC RDIMM need over its service life?

No scheduled maintenance is required; the module has no heat spreader and operates at 1.20 V, so only replace it if memory diagnostics report uncorrectable errors or capacity must be increased.

What limit appears first when this CL22 2Rx8 module runs sustained workloads on an EPYC platform?

The CAS latency of 22 cycles at 3200 MT/s sets the baseline response time; under continuous load the registered buffer and dual-rank organisation keep signal integrity stable, so latency remains the primary constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.