We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM module, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 1Rx8 memory upgrade

SKU CH-FME5-4XAQ7

16 GB DDR4 3200 ECC registered RDIMM with CL22 latency for compatible Kingston servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 ECC RDIMM adds reliable server capacity
  • CL22 1Rx8 timing keeps data integrity under load
  • 2 V operation reduces power draw in dense racks
  • 288-pin registered design fits Kingston server platforms
  • Major OEM Samsung Micron Hynix chips ensure consistent quality

Server memory module

This 16GB DDR4 3200 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It targets system administrators and integrators upgrading Kingston-compatible platforms. The single-rank 1Rx8 organisation suits high-density configurations. Buyers needing non-ECC or unbuffered modules for desktop boards should look elsewhere.

Thermal and power profile

Operating at 1.2V, the module draws minimal power and generates little heat under normal server loads. No heat spreader is fitted, so airflow across the DIMM slots handles cooling. Acoustic impact is negligible because the part has no moving parts. Builders who need active cooling or lower-voltage operation cannot meet those needs with this module.

Deciding specification

The registered ECC design with CL22 latency at 3200 MT/s determines compatibility. Only motherboards that support DDR4 registered DIMMs with error correction can use this memory. Systems limited to unbuffered or non-ECC memory will not accept it.

Highlights

  • 16 GB DDR4 3200 ECC RDIMM adds reliable server capacity
  • CL22 1Rx8 timing keeps data integrity under load
  • 2 V operation reduces power draw in dense racks
  • 288-pin registered design fits Kingston server platforms
  • Major OEM Samsung Micron Hynix chips ensure consistent quality

Specifications

BrandNEMIX RAM
SeriesKingston Server/Workstaion Compatible Series Memory
ModelKingston DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-618K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemKingston
CAS LatencyCL22
Heat SpreaderNo
Type288-PIN DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install this 288-pin DDR4 RDIMM in a server board?

Power down the server, open the chassis, align the module key with the DDR4 slot notch, press firmly until the retention clips click, then verify the 16 GB capacity in BIOS or the OS memory report.

What maintenance will this ECC registered module need over its service life?

No routine maintenance is required; keep the server air filters clean so the 1.20 V module stays within thermal limits and rely on ECC to correct single-bit errors automatically.

What limit appears first when this CL22 3200 MT/s kit runs sustained workloads?

The CAS latency of 22 cycles at 3200 MT/s sets the baseline response time, so memory latency becomes the bottleneck before bandwidth saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.