SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
16 GB DDR4 3200 ECC SODIMM with CL22 latency for Micron-compatible servers and workstations
This 16GB DDR4 3200 ECC SODIMM targets administrators who need error-correcting memory for Micron-compatible servers, workstations or NAS appliances. The unbuffered 1Rx8 organisation and 1.20V operation match the original MTA9ASF2G72HZ-3G2 specification, so the module slots straight into qualified platforms without configuration changes.
Rigorous stress testing under continuous load validates the CL22 timing at the rated PC4-25600 data rate, ensuring that multi-hour compute jobs or always-on storage workloads do not trigger silent data corruption. ECC circuitry corrects single-bit errors on the fly, while the unbuffered design keeps latency low for memory-bound server applications.
The upgrade replaces non-ECC or lower-capacity SODIMMs in systems that require 260-pin DDR4 ECC unbuffered memory and cannot tolerate uncorrected errors. Buyers who need registered DIMMs, higher frequencies or larger single-module capacities should look elsewhere, as this part is fixed at 16GB, 3200MT/s and unbuffered operation.
| Brand | NEMIX RAM |
|---|---|
| Series | Micron Server/Workstaion Compatible Series Memory |
| Model | Micron DDR4 3200MHZ ECC Unbuffered SODIMM |
| Part Number | MSE25600-618K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | MICRON |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 ECC SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 260-PIN ECC Unbuffered SODIMM |
The module operates at the standard DDR4 voltage of 1.20V without a heat spreader, so thermal output matches typical unbuffered ECC SODIMMs; it has no moving parts and produces no audible noise.
The system must accept DDR4 ECC unbuffered SODIMMs at 3200 MT/s (PC4-25600), provide a 260-pin slot, and be configured for 1.20V operation with ECC enabled in the BIOS.
The memory controller will down-clock all populated slots to the lowest common speed and tightest shared timings, so the 3200 MT/s module will run at the slower module's frequency and latency.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?