We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1.1V 1Rx8 UDIMM memory upgrade

SKU CH-XD17-FFSNY

A 16GB DDR5 4800 UDIMM module rated CL40 at 1.1V, validated for THINKMATE VSX-R5-340V12 workstations

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB capacity adds headroom for heavy workloads
  • DDR5 4800 speed moves data faster than older standards
  • CL40 latency keeps response times tight
  • 1 V operation reduces power draw and heat
  • Validated for ThinkMate VSX-R5-340V12 workstation compatibility

16 GB DDR5 UDIMM for Thinkmate VSX-R5-340V12

This 16 GB DDR5 4800 module is built for the Thinkmate VSX-R5-340V12 workstation. It uses a 288-pin unbuffered UDIMM form factor with 1Rx8 organisation. The stick runs at 1.10 V and carries a CL40 latency rating.

Capacity and headroom

A single 16 GB rank adds meaningful space for multi-threaded workloads and virtual machines. The 4800 MT/s data rate handles typical server tasks, but heavy in-memory databases or large render queues will exhaust the single module before the platform reaches its maximum slot count.

CL40 latency at 1.10 V

The decisive spec is CL40 at 1.10 V, which determines whether the memory controller can train without manual timing changes. If your board requires tighter latencies or a different voltage, this module will not post.

Highlights

  • 16 GB capacity adds headroom for heavy workloads
  • DDR5 4800 speed moves data faster than older standards
  • CL40 latency keeps response times tight
  • 1 V operation reduces power draw and heat
  • Validated for ThinkMate VSX-R5-340V12 workstation compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Will this DDR5 4800 module run in my THINKMATE VSX-R5-340V12 alongside existing DDR5 sticks?

Yes — it is a 288-pin DDR5 UDIMM rated at 4800 MT/s, 1.10 V, CL40, 1Rx8, non-ECC and unbuffered, matching the workstation's native memory specification.

How can I verify the module is operating at 4800 MT/s with CL40 timings after installation?

Open the BIOS or a tool such as CPU-Z and confirm the memory frequency reads 4800 MT/s (PC5-38400) with CAS latency 40 at 1.10 V.

What exactly ships in the package and is anything else required to install it?

The box contains one 16 GB DDR5 4800 UDIMM (part MD38400-618K1); no heat spreader, cables or extra brackets are included or needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.