We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM modules, no heat spreader, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1.1V UDIMM memory upgrade for THINKMATE SB Grid-Standard Workstation

SKU CH-MFQ6-8CKNC

16 GB DDR5 kit (2 × 8 GB) running at 4800 MT/s, CL40, 1.1 V, non-ECC unbuffered 288-pin UDIMM validated for ThinkMate SB Grid-Standard workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB kit (2 × 8 GB) doubles capacity for demanding workloads
  • DDR5 4800 MT/s transfers data faster than older DDR generations
  • CL40 latency keeps response tight under heavy multitasking
  • 1 V operation reduces power draw and heat output
  • Validated for ThinkMate SB Grid-Standard workstation compatibility

System-Specific DDR5 Kit for Thinkmate Workstations

This 16 GB kit contains two 8 GB unbuffered UDIMMs built for Thinkmate SB Grid-Standard workstations. The modules run at DDR5 4800 with CL40 latency at 1.10 V. They are non-ECC and use a standard 288-pin desktop form factor.

Major-OEM Chips Without Heat Spreaders

Samsung Micron or Hynix ICs are used depending on supply, all tested under load for stability. The bare PCB design keeps height low for dense chassis layouts. Dual-rank 1Rx8 organisation supports typical dual-channel population on compatible boards.

Verify Workstation Model and Slot Availability

Confirm the exact Thinkmate SB Grid-Standard configuration before ordering because memory validation is system-specific. Ensure two adjacent UDIMM slots are free for the matched pair. No heat spreader means airflow clearance is minimal but check CPU cooler overhang.

Highlights

  • 16 GB kit (2 × 8 GB) doubles capacity for demanding workloads
  • DDR5 4800 MT/s transfers data faster than older DDR generations
  • CL40 latency keeps response tight under heavy multitasking
  • 1 V operation reduces power draw and heat output
  • Validated for ThinkMate SB Grid-Standard workstation compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Does the DDR5 4800 PC5-38400 interface limit the kit to 4800 MT/s in a ThinkMate SB Grid-Standard Workstation?

The kit is rated DDR5 4800 PC5-38400, so it will run at up to 4800 MT/s when the platform supports that speed.

Will the 288-pin DDR5 UDIMM modules fit the ThinkMate SB Grid-Standard Workstation DIMM slots without a heat spreader?

Yes, the 288-pin DDR5 UDIMM form factor matches the workstation slots and the modules have no heat spreader to interfere with tight spacing.

How do I install the 2 x 8 GB kit correctly, and what step is often missed?

Power off, open the case, align each module notch with the slot key, press firmly until both retention clips click, then verify 16 GB appears in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.