We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR5 RDIMM module 288 pin 16GB 4800 CL40 1Rx8 ECC registered

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM 1.1V memory upgrade

SKU CH-WYJ7-W3Q1Y

Adds 16 GB of DDR5 ECC registered memory at 4800 MHz for compatible Supermicro servers

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on heavy server boards
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Low 1.1 V operation reduces power draw per module
  • Validated for SuperMicro FatTwin SuperServer SYS-F521E3-RTB SYS-F511E2-RT X13SEFR-A MBD

Server-grade DDR5 ECC RDIMM

This 16 GB DDR5 module runs at 4800 MT/s with CL40 latency and 1.10 V operation. It uses a 1Rx8 registered design with on-die ECC for data integrity in multi-socket platforms. The 288-pin form factor fits Supermicro FatTwin and SuperServer systems listed in the compatibility data.

Sustained workload behaviour

Registered buffering reduces electrical load on the memory controller during continuous throughput, helping stability in virtualisation and database tasks. ECC correction handles single-bit errors without halting the system. The 1.10 V baseline keeps power draw predictable across long deployments.

Pre-installation checks

Verify that your Supermicro motherboard supports DDR5 RDIMM populations and the 1Rx8 rank configuration for the target slot count. Confirm the BIOS revision enables 4800 MT/s operation with registered modules. Ensure the chassis provides adequate airflow for modules without heat spreaders.

Highlights

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on heavy server boards
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Low 1.1 V operation reduces power draw per module
  • Validated for SuperMicro FatTwin SuperServer SYS-F521E3-RTB SYS-F511E2-RT X13SEFR-A MBD

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How much power does the 1.10 V DDR5 RDIMM draw when the server runs continuously?

The module operates at 1.10 V, which is the standard DDR5 voltage, so power draw stays within the platform's normal memory budget during all-day operation.

What motherboard slot and chipset support are required for this 288-pin ECC registered DIMM?

You need a Supermicro motherboard with DDR5 RDIMM slots and a chipset that supports 4800 MT/s registered ECC memory, such as the X13SEFR-A used in FatTwin SYS-F511E2-RT and SYS-F521E3-RTB systems.

Will this CL40 1Rx8 stick share channels with older DDR5 RDIMMs already installed?

Mixing ranks or latencies can work if the motherboard qualifies the combination, but the safest path is to populate identical 1Rx8 CL40 modules per channel for guaranteed stability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.