We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM memory module 288 pins 16GB 4800MHz CL40 1.10V ECC registered

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC RDIMM memory upgrade

SKU CH-AX6B-FDMDN

16 GB DDR5 4800 ECC registered server memory for Thinkmate GPU-optimised systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Registered design improves signal integrity on server motherboards
  • Low 1.1V voltage reduces power draw per module
  • Validated for ThinkMate GPX-QH12-12E4-2GPU GPU-optimised server

Capacity and form factor

This NEMIX RAM module provides 16 GB of DDR5 memory in a single 288-pin RDIMM. It is built for Thinkmate GPX-QH12-12E4-2GPU GPU-optimised servers and workstations that require registered ECC memory. The 1Rx8 organisation and 1.10 V operation match the platform's native specifications.

Replacing slower or smaller DIMMs

Upgrading from lower-speed DDR5 or from non-ECC unbuffered modules adds error correction and registered signalling for data integrity under sustained load. The jump is worth it when the server runs virtualisation, GPU compute or database workloads that demand maximum uptime and consistent throughput at 4800 MT/s.

Compatibility checklist

Verify that your Thinkmate system accepts DDR5 4800 RDIMMs with CL40 timing and 1.10 V voltage. Confirm the motherboard has free 288-pin slots and that the BIOS supports registered ECC modules of this rank and density. Consult the system manual for population rules before ordering.

Highlights

  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • Registered design improves signal integrity on server motherboards
  • Low 1.1V voltage reduces power draw per module
  • Validated for ThinkMate GPX-QH12-12E4-2GPU GPU-optimised server

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 288-pin DDR5 RDIMM fit the memory slots on my THINKMATE GPX-QH12-12E4-2GPU server?

Yes — the module is a 288-pin DDR5 RDIMM built to the DDR5 4800 (PC5-38400) standard, which is the slot type used by that server.

What is the correct order for seating the 1Rx8 registered DIMM so the ECC function activates?

Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then power on and verify ECC status in the BIOS.

How do I know when the 1.10 V Samsung, Micron or Hynix chips should be replaced?

Run periodic memory diagnostics; if correctable ECC error counts rise steadily or the system logs uncorrectable errors, plan a replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.