We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips on both sides no heat spreader 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1.1V 1Rx8 ECC Registered RDIMM Supermicro H13SVW-NT memory upgrade

SKU CH-HF0P-CQFTG

16 GB DDR5 6400 CL52 1.1 V 1Rx8 ECC registered RDIMM validated for Supermicro H13SVW-NT servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-6400 CL52 1.10V for full rated speed
  • Registered ECC RDIMM offloads controller for stable full-capacity loads
  • 1Rx8 288-pin form factor verified for Supermicro H13SVW-NT
  • ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support

Exact-match server upgrade

This 16 GB DDR5-6400 Registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SVW-NT memory controller expects. It installs as a single 288-pin module and is recognised at full capacity and rated speed without manual tuning.

Registered ECC architecture

The 1Rx8 Registered design buffers address and command signals so every populated slot runs at full capacity while ECC corrects single-bit errors on the fly. The module has no heat spreader and relies on the server chassis airflow for cooling.

Low-voltage DDR5 efficiency

Operating at 1.10 V the module draws minimal power and generates little heat in normal server workloads. Silent passive operation is assured because there is no onboard fan and the Registered buffer reduces electrical load on the memory controller.

Highlights

  • Exact-match DDR5-6400 CL52 1.10V for full rated speed
  • Registered ECC RDIMM offloads controller for stable full-capacity loads
  • 1Rx8 288-pin form factor verified for Supermicro H13SVW-NT
  • ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What speed does the DDR5 6400 interface cap at in practice?

The module runs at DDR5 6400 (PC5-51200) with CL52 latency and 1.10 V, matching the Supermicro H13SVW-NT memory controller specification.

What physical slot and form factor does this 288-pin RDIMM require?

It needs a standard 288-pin DDR5 RDIMM slot on the Supermicro H13SVW-NT motherboard; the registered form factor is not interchangeable with UDIMM or SODIMM.

How is the MR51200-618K1 installed, and which population step is often missed?

Power down, open the chassis, and insert the 1Rx8 RDIMM into the slot sequence defined in the Supermicro H13SVW-NT manual; the step most often missed is following the exact DIMM population order for the specific CPU configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.