We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 memory module with gold edge connector and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 6400 CL52 1Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-2WGP-EFEHA

16 GB DDR5 6400 CL52 1.1 V ECC registered RDIMM validated for Supermicro H13DSG-OM

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Full 16 GB capacity at rated 6400 speed
  • Registered ECC design prevents silent data errors
  • 1 V operation matches server spec exactly
  • 288-pin RDIMM fits Supermicro H13DSG-OM board
  • Single-rank 1Rx8 layout enables full population

Exact-fit DDR5 RDIMM for Supermicro H13DSG-OM

This 16 GB registered ECC module runs at DDR5 6400 with CL52 timing at 1.1 V. The 288-pin RDIMM form factor matches the motherboard's memory-population rules so the controller recognises full capacity immediately. It is built for servers that require registered architecture and error correction.

Sustained enterprise stability under load

Registered buffering offloads the memory controller, allowing every populated slot to run at rated speed continuously. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during long compute runs. The fixed 1Rx8 organisation keeps timing predictable across all ranks.

Thermals noise and power in normal use

Operating at 1.1 V reduces power draw compared with higher-voltage DDR5 modules. No heat spreader is fitted, so airflow across the bare PCB handles cooling in standard server chassis. The module produces no audible noise and adds minimal thermal load to the system.

Highlights

  • Full 16 GB capacity at rated 6400 speed
  • Registered ECC design prevents silent data errors
  • 1 V operation matches server spec exactly
  • 288-pin RDIMM fits Supermicro H13DSG-OM board
  • Single-rank 1Rx8 layout enables full population

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How much heat does the 1.1V DDR5 RDIMM generate when the server runs continuously?

Operating at 1.1V, the 16GB DDR5-6400 registered module draws minimal power, keeping thermal output low even under sustained all-day workloads in fully populated Supermicro H13DSG-OM slots.

What motherboard slot and population rules must my system already have for this 288-pin RDIMM to work?

Your Supermicro H13DSG-OM must provide DDR5 RDIMM slots and follow its documented population order; the module is a 288-pin registered ECC DIMM that only fits and runs at rated speed in that exact configuration.

Will this CL52 registered ECC module run reliably alongside older DDR5 RDIMMs already installed in my Supermicro board?

Mixing ranks, latencies or voltages can prevent full-speed operation; for stable all-day use the board should use identical 1Rx8 1.1V CL52 registered ECC DIMMs in the approved population sequence.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.