We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (12x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X410c M7 memory upgrade

SKU CH-6HBN-K0SG3

192 GB DDR5 registered ECC server memory kit with twelve 16 GB modules at 4800 MT/s CL40 1.1 V for Cisco UCS X410c M7 compute nodes

  • Capacity192GB (12 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192 GB total capacity from 12 modules of 16 GB each
  • DDR5 4800 speed rated at PC5-38400 for server workloads
  • ECC registered RDIMM design protects data integrity in critical systems
  • CL40 latency at 1.1 V balances response time and power efficiency
  • 288-pin DDR5 RDIMM form factor built for Cisco UCS X410c M7 compatibility

Cisco UCS X410c M7 Memory Kit

This 192GB DDR5 kit uses twelve 16GB registered ECC modules built for the Cisco UCS X410c M7 compute node. It targets IT teams expanding memory capacity in validated server configurations.

Thermals Noise Power Draw

Registered DDR5 modules operate at 1.1V without onboard heat spreaders, relying on server chassis airflow for cooling. Power draw scales with the 4800 MT/s data rate and 1Rx8 organisation under typical enterprise workloads.

192GB DDR5 4800 CL40 ECC RDIMM

The kit delivers 192GB at DDR5 4800 with CL40 latency in a 288-pin RDIMM form factor. Buyers needing non-ECC unbuffered DIMMs or a different capacity per module must select another part.

Highlights

  • 192 GB total capacity from 12 modules of 16 GB each
  • DDR5 4800 speed rated at PC5-38400 for server workloads
  • ECC registered RDIMM design protects data integrity in critical systems
  • CL40 latency at 1.1 V balances response time and power efficiency
  • 288-pin DDR5 RDIMM form factor built for Cisco UCS X410c M7 compatibility

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (12X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I install the 12 DDR5 RDIMM modules in the Cisco UCS X410c M7 compute node, and what step is often missed?

Power down the node, open the chassis, align each 288-pin module with its slot, press firmly until the ejector tabs click, then verify all 12 modules appear in BIOS before booting the OS.

What maintenance or replacement will the 192GB DDR5 4800 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; if a module fails the ECC logic will log correctable errors, and the faulty 16GB stick can be swapped individually without replacing the full 12-module kit.

What limit appears first when the 1Rx8 registered DDR5 memory runs sustained workloads at 1.1V?

The CAS latency of CL40 at 4800 MT/s sets the timing ceiling; sustained throughput is bounded by this latency figure rather than voltage or thermal throttling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.