We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288 pins each, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (2 x 96GB) DDR5 6400 CL52 1.1V ECC Registered RDIMM memory upgrade for Supermicro H14DSG-O-CPU

SKU CH-R96W-FDNXG

192 GB DDR5-6400 ECC registered RDIMM kit (2 × 96 GB, CL52, 1.10 V) validated for Supermicro H14DSG-O-CPU

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 192 GB capacity with two 96 GB modules
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1 V operating voltage
  • ECC registered RDIMM for error correction and signal buffering
  • 288-pin 2Rx4 form factor matched to Supermicro H14DSG-O-CPU

Exact-Match Server Upgrade

This 192GB kit contains two 96GB DDR5 6400 RDIMMs built to the Supermicro H14DSG-O-CPU memory specification. Registered ECC architecture with 2Rx4 organisation and 1.10V operation lets the board recognise full capacity at rated speed. CL52 latency matches the controller timing tables without manual tuning.

For Populated Enterprise Slots

Suits administrators filling every DIMM slot on the validated platform while keeping registered buffering and error correction active. Not for consumer desktops or workstations that accept only unbuffered UDIMMs, nor for systems limited to lower maximum module density or different pin-out.

Sustained Load Stability

Registered buffering offloads the memory controller so all channels remain stable when fully populated under continuous throughput. ECC corrects single-bit errors in real time, preventing silent corruption during long compute runs. 1.10V operation keeps thermals predictable without extra cooling headroom.

Highlights

  • 192 GB capacity with two 96 GB modules
  • DDR5 6400 speed rated at PC5-51200 bandwidth
  • CL52 latency at 1.1 V operating voltage
  • ECC registered RDIMM for error correction and signal buffering
  • 288-pin 2Rx4 form factor matched to Supermicro H14DSG-O-CPU

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Do I need a Supermicro H14DSG-O-CPU motherboard for this 192GB kit to work?

Yes, this 192GB (2 x 96GB) DDR5 6400 CL52 1.1V ECC Registered RDIMM kit is validated for the Supermicro H14DSG-O-CPU motherboard and its 288-pin RDIMM slots.

Can I mix these 96GB 2Rx4 modules with smaller DDR5 RDIMMs already in the board?

Mixing different capacities or ranks can change the memory population order the board expects; consult the motherboard manual for approved configurations before adding these modules.

How can I confirm the kit is running at DDR5 6400 with CL52 after installation?

Check the BIOS memory information or a tool such as CPU-Z to verify the speed reads 6400 MT/s, CAS latency 52, voltage 1.10V and that both 96GB modules are detected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.