SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
192 GB DDR5 ECC registered server memory kit with two 96 GB modules at 5600 MT/s CL46 for SuperMicro systems
This 192GB kit contains two 96GB DDR5 5600 registered DIMMs with ECC and a CAS latency of CL46. It is built for Supermicro servers and workstations that require registered memory. The modules operate at 1.1V and use a 2Rx4 organisation.
Registered buffering and on-die ECC maintain data integrity during continuous operation in multi-socket platforms. The 1.1V operating voltage helps limit thermal output when all slots are populated. Modules are stress tested under load before shipment.
Verify that your Supermicro motherboard supports 96GB DDR5 RDIMM modules and the 2Rx4 rank configuration. Confirm the platform accepts PC5-44800 speed and 1.1V operation. Check the maximum memory capacity per socket and the required population rules in the system manual.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 192GB (2X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Each module runs at 1.10 V with no heat spreader, so the 2Rx4 design keeps power draw low for continuous server workloads.
A Supermicro server board with DDR5 RDIMM slots and a chipset that supports 5600 MT/s registered ECC memory is required.
The kit is rated at 5600 MT/s CL46; when mixed with 4800 MT/s modules the system will run all DIMMs at the lower speed and looser timings.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?