We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 ECC RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB (8 x 128GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM server RAM

SKU CH-KRJ6-ATHR5

Eight 128 GB DDR5 registered ECC modules at 6400 MHz with CAS 52 and 1.1 V for high-capacity server upgrades

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 6400 (PC5 51200)
  • CAS Latency52
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 1TB total capacity with eight 128GB modules
  • DDR5 6400 speed rated at PC5-51200
  • ECC registered design detects and corrects data errors
  • 2Rx4 organisation on 288-pin DIMMs
  • Low 1.1V operating voltage reduces power draw

Server DDR5-6400 registered ECC kit

This NEMIX RAM kit provides 1 TB of DDR5 server memory across eight 128 GB registered DIMMs. Each module runs at 6400 MT/s with a CAS latency of 52 and operates at 1.1 V. The 2Rx4 organisation and on-die ECC suit multi-socket platforms that require registered, error-correcting memory. It is not compatible with standard desktop or laptop motherboards.

Replacing slower or smaller registered DDR5

The kit upgrades systems currently populated with lower-capacity or lower-speed registered DDR5 DIMMs. The jump is worthwhile when the workload needs the full 1 TB aggregate capacity or the 6400 MT/s data rate to reduce latency-bound stalls. Servers already running at this speed and capacity will not benefit from the swap.

Verify registered DDR5-6400 support and slot count

Confirm the motherboard accepts 288-pin registered DDR5 DIMMs at 6400 MT/s and that the CPU memory controller supports 2Rx4 modules at this frequency. Ensure eight DIMM slots are available and that the BIOS is current enough to initialise the full 1 TB configuration. Cooling clearance for tall heatsinks should also be checked.

Highlights

  • 1TB total capacity with eight 128GB modules
  • DDR5 6400 speed rated at PC5-51200
  • ECC registered design detects and corrects data errors
  • 2Rx4 organisation on 288-pin DIMMs
  • Low 1.1V operating voltage reduces power draw

Specifications

BrandNEMIX RAM
ModelPart#: MR51200-724K8-SM-SYS-112C-TN
Part NumberPart#: MR51200-724K8-SM-SYS-112C-TN
Capacity1TB (8 x 128GB)
SpeedDDR5 6400 (PC5 51200)
CAS Latency52
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

Will the 288-pin DDR5 RDIMMs fit my server's memory slots?

These are standard 288-pin DDR5 RDIMMs, so they fit any server board with DDR5 RDIMM slots.

Do I need to populate all eight 128GB modules at once, or can I start with fewer?

You can install fewer than eight modules, but follow the motherboard's population rules for 2Rx4 registered DIMMs to keep the memory controller stable.

How long do the Samsung, Micron or Hynix chips typically last before replacement is needed?

Server-grade DDR5 chips are rated for years of continuous operation; replace a module only if ECC logs report uncorrectable errors or the system fails POST.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.