We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green circuit boards with black chips in a row

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 5600 CL46 4Rx4 ECC RDIMM SuperMicro B13SEG memory upgrade

SKU CH-VJSB-15BWS

Eight 128 GB DDR5 modules deliver 1 TB of registered ECC memory at 5600 MT/s with CL46 latency for SuperMicro B13SEG servers

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB total capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • 4Rx4 organisation maximises density per DIMM slot
  • 1V operation reduces power draw in dense configurations

System-Specific DDR5 ECC Kit

This NEMIX RAM kit delivers 1 TB of DDR5 memory across eight 128 GB registered DIMMs. It is built for the SuperMicro B13SEG motherboard and targets administrators upgrading enterprise servers or workstations that require ECC protection. Modules run at 5600 MT/s with CL46 latency at 1.1 V.

Suited for B13SEG capacity upgrades

The 4Rx4 organisation and registered design match the board's validated memory topology. Sites needing maximum density in every slot will benefit. Buyers using consumer boards, non-ECC platforms, or systems limited to lower ranks should look elsewhere.

DDR5 5600 CL46 4Rx4 registered spec

The decisive factor is the combination of DDR5 5600 speed, CL46 timing, 4Rx4 rank structure and registered ECC operation at 1.1 V. Only motherboards qualified for this exact configuration will post and run stably.

Highlights

  • 1TB total capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • 4Rx4 organisation maximises density per DIMM slot
  • 1V operation reduces power draw in dense configurations

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How can I verify the kit runs at DDR5 5600 CL46 after installation?

Check the BIOS or a tool like CPU-Z; each module should report 5600 MT/s and CL46 timings at 1.1 V.

What exactly ships in the package and is anything else required?

The box contains eight 128 GB 288-pin DDR5 RDIMM modules (1 TB total); no extra parts or cables are needed for a compatible SuperMicro B13SEG board.

Which capacity option should I pick for a SuperMicro B13SEG that supports 1 TB?

This single kit delivers the full 1 TB (8 × 128 GB) in a matched set, so no additional kits are necessary.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.