We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 5600 PC5-44800 CL46 4Rx4 1.1V ECC RDIMM SuperMicro X13DGU memory upgrade

SKU CH-Q02E-B7FHF

Eight-module kit adds 1 TB of DDR5 5600 ECC registered memory to compatible SuperMicro X13DGU AI SuperServer motherboards

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • 4Rx4 organisation maximises density per DIMM slot
  • 1V operation reduces power draw in dense configurations

1TB DDR5 ECC RDIMM kit for SuperMicro X13DGU

This 1TB memory kit contains eight 128GB registered DDR5 modules built for the SuperMicro MBD-X13DGU AI SuperServer motherboard. It targets IT teams and system integrators who need maximum registered ECC capacity in a single validated package for memory-intensive server workloads.

Registered 4Rx4 modules without heat spreaders

Each 288-pin RDIMM runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1V using major OEM Samsung, Micron or Hynix chips. The registered 4Rx4 organisation reduces electrical load on the memory controller, while the bare-module design fits dense server DIMM layouts where tall heat spreaders would block airflow or adjacent slots.

Verify eight free DDR5 RDIMM slots and 4Rx4 support

Confirm the X13DGU has eight available 288-pin DDR5 RDIMM slots and that the CPU and BIOS revision support 4Rx4 registered modules at the rated speed. Registered ECC memory cannot be mixed with unbuffered or non-ECC DIMMs, so all populated slots must use identical registered ECC modules for stable operation.

Highlights

  • 1TB capacity across eight 128GB modules
  • DDR5 5600 speed for high-throughput server workloads
  • ECC registered design detects and corrects data errors
  • 4Rx4 organisation maximises density per DIMM slot
  • 1V operation reduces power draw in dense configurations

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the DDR5 5600 PC5-44800 interface limit the SuperMicro X13DGU to 4800 MT/s in practice?

The kit is rated for DDR5 5600 (PC5-44800) with CL46 latency; the motherboard's memory controller determines the final operating speed.

What physical slot and module count does this 1 TB kit require on the X13DGU?

Eight 288-pin DDR5 RDIMM slots are needed, one per 128 GB module, and the board must support 4Rx4 registered DIMMs.

How is the kit installed and which step is commonly missed?

Power down, open the chassis, align each module's key notch with the 288-pin slot, press firmly until both latches click, then verify all eight modules appear at POST.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.