We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR4 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR4 3200 CL22 ECC RDIMM for THINKMATE GPX-XS8-14S3-4GPU memory upgrade

SKU CH-N6Q1-F7064

256 GB DDR4 3200 ECC registered server memory kit with sixteen 16 GB modules at CL22 and 1.2 V for ThinkMate workstations

  • Capacity256GB (16 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 256 GB capacity across 16 modules for high-density server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for responsive data throughput
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 20 V operation reduces power draw per 288-pin module
  • CL22 CAS latency with 2Rx8 organisation balances timing and density

System-Specific ECC RDIMM Kit

This NEMIX RAM kit provides 256GB of DDR4 3200 registered ECC memory in sixteen 16GB modules. It is built for the Thinkmate GPX-XS8-14S3-4GPU workstation and uses 2Rx8 organization at 1.2V with CL22 latency. The modules are 288-pin RDIMMs without heat spreaders.

Suited for Thinkmate Workstation Upgrades

This memory suits administrators expanding the Thinkmate GPX-XS8-14S3-4GPU to its full 256GB capacity with validated ECC RDIMMs. Builders needing unbuffered UDIMMs, non-ECC modules, or a different form factor such as SODIMM cannot use this kit.

Steady Throughput Under Continuous Load

Registered buffering and ECC correction maintain data integrity during sustained multi-threaded workloads on the target workstation. The CL22 timing and 1.2V operation deliver consistent bandwidth without the voltage scaling required by higher-frequency kits.

Highlights

  • 256 GB capacity across 16 modules for high-density server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for responsive data throughput
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 20 V operation reduces power draw per 288-pin module
  • CL22 CAS latency with 2Rx8 organisation balances timing and density

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K16
Capacity256GB (16 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What existing memory must the THINKMATE GPX-XS8-14S3-4GPU already support for this DDR4 3200 CL22 ECC RDIMM kit to work?

The workstation must accept DDR4 288-pin registered ECC RDIMMs at 1.2 V with a CAS latency of CL22 and a 2Rx8 organisation.

How will these 16 modules at 3200 MHz behave if I keep slower DDR4 RDIMMs installed in the same system?

All installed RDIMMs will run at the speed of the slowest module, so mixing slower DDR4 ECC RDIMMs will down-clock the 3200 MHz kit to that lower frequency.

How can I confirm the full 256 GB kit is detected and operating with ECC after installation?

Enter the BIOS or UEFI on the THINKMATE GPX-XS8-14S3-4GPU and verify that 256 GB is reported with ECC enabled and the memory speed shows 3200 MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.