We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 1.1V ECC RDIMM memory upgrade

SKU CH-016K-7GCAG

256GB DDR5 4800 ECC registered server memory kit with 16 modules of 16GB each at CL40 and 1.1V for SuperMicro SuperServer systems

  • Capacity256GB (16 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity across 16 DDR5 modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity in servers
  • 1 V operating voltage reduces power draw
  • Validated for SuperMicro SYS-421GE-TNRT SYS-821GE-TNHR SYS-821GV-TNR

256GB DDR5 ECC RDIMM kit

This 256GB kit contains sixteen 16GB DDR5 4800 registered DIMMs built for Supermicro GPU SuperServer platforms including the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT. Each module operates at 1.1V with CL40 latency and provides error-correcting code protection for data integrity. The 1Rx8 organisation suits dense memory configurations in enterprise workloads.

DDR5 4800 registered memory limits

Registered DDR5 4800 modules require a motherboard chipset and CPU memory controller that support the DDR5 RDIMM standard at the rated transfer rate. The registered buffer adds one clock cycle of latency compared with unbuffered modules and the platform must populate slots according to its validated population rules. Bandwidth and maximum capacity are defined by the server platform, not by the modules alone.

Installing sixteen 288-pin RDIMMs

Installation follows the server manual slot sequence; mixing ranks or skipping populated channels can prevent the system from posting. The modules have no heat spreader, so airflow across the DIMM sockets must meet the chassis specification. Firmware should be updated before adding the full 256GB to avoid training failures on cold boot.

Highlights

  • 256 GB total capacity across 16 DDR5 modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design protects data integrity in servers
  • 1 V operating voltage reduces power draw
  • Validated for SuperMicro SYS-421GE-TNRT SYS-821GE-TNHR SYS-821GV-TNR

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Should I choose the 16x16GB kit or a smaller capacity for my SuperMicro server?

The kit provides 256GB total across 16 modules of 16GB each; select it when your SuperMicro SYS-821GE-TNHR, SYS-821GV-TNR or SYS-421GE-TNRT requires the full 256GB population.

What does the 4800 MT/s rating deliver once the modules are installed?

The memory runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.10V, giving the rated throughput and timing on the supported SuperMicro GPU SuperServer platforms.

How does the 288-pin registered DDR5 interface limit use in other systems?

These are 288-pin DDR5 RDIMM modules with ECC and registered buffering; they only operate in DDR5 RDIMM slots on the compatible SuperMicro servers listed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.