We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 ECC RDIMM for THINKMATE GPX-XS8-24S4-4GPU Workstation memory upgrade

SKU CH-MJGJ-B4W70

256GB DDR5 4800 ECC registered kit with 16 modules at CL40 and 1.1V for the Thinkmate GPX-XS8-24S4-4GPU workstation

  • Capacity256GB (16 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB capacity from sixteen 16 GB modules for large workloads
  • DDR5 4800 speed rated PC5-38400 for high bandwidth
  • ECC registered RDIMM design protects data integrity
  • 1 V operation at CL40 latency reduces power draw
  • Validated compatible with ThinkMate GPX-XS8-24S4-4GPU workstation

Capacity and configuration

This kit provides 256GB of DDR5 memory in sixteen 16GB modules, delivering 4800 MT/s speed with CL40 latency. It is built for the THINKMATE GPX-XS8-24S4-4GPU workstation and targets users who need maximum registered ECC capacity for memory-intensive workloads.

Thermals, noise and power

Each module operates at 1.1V without a heat spreader, relying on the workstation's directed airflow for cooling. Registered buffering and ECC add minimal electrical overhead, so power draw scales predictably with the full 16-module population under sustained load.

Build and daily implications

The 288-pin RDIMM form factor uses major OEM chips from Samsung, Micron or Hynix and omits a heat spreader to fit dense server DIMM slots. Installing all sixteen modules fills every available channel, leaving no room for further expansion and requiring careful slot population order per the system manual.

Highlights

  • 256 GB capacity from sixteen 16 GB modules for large workloads
  • DDR5 4800 speed rated PC5-38400 for high bandwidth
  • ECC registered RDIMM design protects data integrity
  • 1 V operation at CL40 latency reduces power draw
  • Validated compatible with ThinkMate GPX-XS8-24S4-4GPU workstation

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install the 16 DDR5 RDIMM modules into the THINKMATE GPX-XS8-24S4-4GPU workstation and which step is most often missed?

Power off the system, open the chassis, align each 288-pin module with its slot, press firmly until the retention clips click, then verify all 16 modules are detected in BIOS before closing the case.

What maintenance or replacement will this 256GB DDR5 ECC registered memory kit need over its service life?

The modules have no heat spreaders and no moving parts; they require no scheduled maintenance and are covered by a lifetime replacement warranty if a module fails.

What is the first limit that appears when this DDR5 4800 CL40 1.1V memory runs sustained workloads on the THINKMATE workstation?

The CL40 latency at 4800 MT/s and 1.1 V sets the bandwidth ceiling; sustained throughput cannot exceed the JEDEC DDR5-4800 specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.