We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 memory modules, no heat spreaders, 256GB kit

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 4800 CL40 ECC RDIMM Dell Precision 7875 memory upgrade

SKU CH-ZK3T-MWCJF

256 GB dual-channel DDR5 ECC registered kit running at 4800 MT/s CL40 for Dell Precision 7875 workstations

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity under load
  • 1 V operation keeps power draw low
  • Validated for Dell Precision 7875 workstation compatibility

Dell Precision 7875 ECC RDIMM kit

This 256 GB kit supplies two 128 GB DDR5 4800 CL40 registered ECC modules built for the Dell Precision 7875 workstation. The 4Rx4 organisation and 1.1 V operation match the platform's qualified memory list.

Workstations needing maximum registered ECC capacity

The kit suits users who require 256 GB of registered error-correcting memory in a validated two-module configuration. Systems that cannot accept registered DIMMs, need unbuffered memory, or require speeds above 4800 MT/s should look at other solutions.

Straightforward DIMM installation

Installation follows the standard 288-pin DDR5 RDIMM procedure: power down, open the chassis, seat each module firmly until the retention clips engage, then verify the full 256 GB in BIOS. The most common issue is failing to populate the correct slots per the Dell Precision 7875 memory population rules, which can prevent the system from recognising the full capacity.

Highlights

  • 256 GB total capacity from two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity under load
  • 1 V operation keeps power draw low
  • Validated for Dell Precision 7875 workstation compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What motherboard slot and voltage does my system need for these 288-pin DDR5 4800 modules?

The kit uses 288-pin DDR5 RDIMM slots and runs at 1.1V, so the workstation must provide DDR5 registered DIMM sockets at that voltage.

Can I mix these 4Rx4 CL40 sticks with other DDR5 ECC RDIMMs of different rank or speed?

Mixing ranks or speeds is not recommended; the system will default to the slowest common timing and may disable ECC or registered features if configurations differ.

How do I confirm the full 256 GB is recognised and ECC is active after install?

Enter BIOS or UEFI on the Dell Precision 7875 and verify the memory summary shows 256 GB at 4800 MT/s with ECC status enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.