We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-TTG6-FEKCC

Adds 256 GB of DDR5 4800 ECC registered memory in two 128 GB modules for Supermicro servers

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity with two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • Low 1.1 V operating voltage reduces power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

SuperMicro X13SET Compatible Memory

This 256 GB kit contains two 128 GB DDR5 registered DIMMs built for SuperMicro X13SET-G and X13SET-GC motherboards. It targets IT professionals and system integrators who need ECC RDIMM capacity for enterprise servers and workstations.

Verify DDR5 RDIMM support and slot population

Confirm that your SuperMicro X13SET platform accepts 4Rx4 registered modules at 4800 MT/s and that the BIOS revision in use supports the full 256 GB configuration before ordering.

Low-voltage operation at 1.1 V

The modules run at 1.10 V without heat spreaders, relying on server chassis airflow for cooling. Registered buffering and ECC add minimal latency while maintaining signal integrity under sustained load.

Highlights

  • 256 GB total capacity with two 128 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design detects and corrects data errors
  • Low 1.1 V operating voltage reduces power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What does the 256 GB kit contain and do I need any extra parts?

The kit includes two 128 GB DDR5 RDIMM modules for a total of 256 GB; no additional components are required for installation in a compatible SuperMicro X13SET-G or X13SET-GC motherboard.

Should I choose this 2 x 128 GB CL40 kit or look for a different capacity or latency?

This is the only capacity and latency offered for this part number; it provides 256 GB at CL40 and is validated for the listed SuperMicro platforms.

What does the 4800 MT/s rating mean once the modules are installed in a server?

The memory will run at up to 4800 MT/s (PC5-38400) with CL40 timings at 1.1 V, delivering registered ECC bandwidth supported by the SuperMicro X13SET-G and X13SET-GC motherboards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.