We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 4800 ECC RDIMM 4Rx4 CL40 1.1V Dell PowerEdge XR5610 memory upgrade

SKU CH-AN3D-MN124

A 256GB kit of two 128GB DDR5 4800 ECC registered DIMMs with CL40 latency and 1.1V operation for Dell PowerEdge XR5610 servers

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity in a 2 × 128 GB kit
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM for data integrity under load
  • 4Rx4 dual-rank organisation for high-density server slots
  • 1 V low-voltage operation reduces power draw

Dell PowerEdge XR5610 Memory Kit

This 256 GB kit consists of two 128 GB DDR5 4800 ECC registered DIMMs built for the Dell PowerEdge XR5610 rack server. Each module runs at 1.1 V with CL40 latency and a 4Rx4 organisation across 288 pins.

Suited for administrators expanding XR5610 capacity

The kit fits Dell PowerEdge XR5610 systems that accept DDR5 4800 registered ECC memory in a two-module configuration. Buyers needing unbuffered DIMMs, non-ECC modules, a different pin count or a voltage other than 1.1 V should look elsewhere.

256 GB total capacity in a 2 x 128 GB registered

The decisive specification is the 256 GB capacity delivered as two 128 GB DDR5 4800 CL40 registered ECC DIMMs at 1.1 V. Confirm the XR5610 memory slot population rules before ordering.

Highlights

  • 256 GB total capacity in a 2 × 128 GB kit
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM for data integrity under load
  • 4Rx4 dual-rank organisation for high-density server slots
  • 1 V low-voltage operation reduces power draw

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR5 RDIMM modules fit the Dell PowerEdge XR5610 memory slots?

Yes, the kit uses the standard 288-pin DDR5 RDIMM form factor that matches the XR5610 DIMM sockets.

What is the correct order for installing the two 128GB modules in the XR5610?

Populate the channels identified in the server service manual first, typically one DIMM per channel, and ensure each module clicks fully into the ejector tabs.

How can I verify long-term reliability of the 4Rx4 ECC registered modules after deployment?

Enable ECC scrubbing in the BIOS and monitor corrected error counters via the iDRAC; a rising count on a specific DIMM signals it should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.