NEMIX RAM 256GB 4x64GB DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM Supermicro X14SDV-42C-SP3F memory upgrade
- 256GB (4 x 64GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 256 GB DDR5 registered ECC kit with two 128 GB modules at 5600 MHz, CL46, 1.1 V, 4Rx4, validated for the Supermicro X14SDI-36C-SP3F motherboard
Size 256GB 2X128GB
This 256 GB kit contains two 128 GB DDR5 RDIMMs rated at 5600 MHz with CL46 latency and 1.1 V operation. Registered ECC architecture and 4Rx4 organisation let the Supermicro X14SDI-36C-SP3F motherboard recognise full capacity across both slots without down-clocking. The modules ship new and ready for immediate installation in compatible systems.
Registered DIMMs are required by this board; unbuffered UDIMMs or SODIMMs will not function in the 288-pin slots. Each channel supports a defined maximum rank count, so filling every socket with 4Rx4 modules works only when the memory controller and BIOS revision allow that density. Consult the motherboard manual for the approved population sequence and any per-channel rank ceiling before ordering.
The 4Rx4 organisation determines whether the memory controller can address the full 256 GB at the rated 5600 MHz speed. If the platform firmware or CPU revision caps rank-per-channel lower than this kit provides, the system will either reduce speed, halve usable capacity, or fail to post. Verify the exact rank limit for your specific processor and BIOS version prior to purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
This kit provides 256GB total as two 128GB modules, matching the board's DDR5 5600MHz PC5-44800 4Rx4 Registered ECC specification. Consult your motherboard manual for supported capacities and approved DIMM population order before deciding.
The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V. Registered architecture offloads the memory controller so every slot runs fully populated at rated speed, while ECC corrects single-bit errors on the fly.
The 288-pin Registered RDIMM form factor is exactly what the X14SDI-36C-SP3F requires. It enables full-capacity population across all supported slots at the rated DDR5 5600MHz speed without downclocking.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?