We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 4800 CL40 1.1V ECC RDIMM 2Rx4 Dell PowerEdge XE9680 memory upgrade

SKU CH-BZCH-90Z7W

A 256GB quad-channel kit of 4800MHz DDR5 ECC registered DIMMs built for Dell PowerEdge XE9680 servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity across four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM with 2Rx4 organisation for data integrity
  • Low 1.1 V operating voltage reduces power draw
  • Validated compatibility with Dell PowerEdge XE9680 rack servers

Dell PowerEdge XE9680 DDR5 ECC Kit

This NEMIX RAM kit delivers 256GB of DDR5 4800 registered ECC memory in four 64GB modules. It is built for the Dell PowerEdge XE9680 rack server and runs at 1.1V with CL40 latency. The 2Rx4 organisation and 288-pin RDIMM form factor match the platform's native requirements.

Suited For Dense Server Workloads

IT teams expanding memory capacity in a Dell PowerEdge XE9680 will find this kit validated for that chassis. Buyers who need unbuffered UDIMMs, non-ECC modules, or speeds above 4800 MT/s should look elsewhere because this kit is registered ECC only.

Registered ECC DDR5 At 4800 MT/s

The decisive specification is registered ECC DDR5 operating at 4800 MT/s with CL40 timing. Only systems that accept 288-pin RDIMMs at this speed and voltage can use the kit; any platform requiring a different memory type or rank configuration will not be compatible.

Highlights

  • 256 GB total capacity across four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM with 2Rx4 organisation for data integrity
  • Low 1.1 V operating voltage reduces power draw
  • Validated compatibility with Dell PowerEdge XE9680 rack servers

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the kit include only the four 64 GB DDR5 4800 CL40 1.1 V ECC RDIMM modules, or are any extra parts required?

The box contains the four 64 GB modules that make up the 256 GB kit; no additional components are needed for installation in a compatible Dell PowerEdge XE9680 server.

Should I choose this 256 GB kit or a smaller capacity for my Dell PowerEdge XE9680?

Select the 256 GB kit when the workload demands the full 256 GB capacity; a smaller kit would leave memory slots unpopulated and reduce total system memory.

What does the 4800 MT/s speed rating mean once the modules are installed in the PowerEdge XE9680?

The memory will operate at 4800 MT/s with CL40 latency at 1.1 V, delivering the rated DDR5 4800 bandwidth for supported server workloads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.